Hemi Head CNC porting - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Hemi Head CNC porting

Print Thread

Page 1 of 2

1

2

Hemi Head CNC porting #1355038 12/18/12 05:14 PM 12/18/12 05:14 PM
Joined: Jun 2009 Posts: 1,212 QLD Australia Keith Black® OP pro stock
Keith Black® OP pro stock Joined: Jun 2009 Posts: 1,212 QLD Australia	Hi everyone, I need to get a set of Hemi Stage V (standard replacement heads) CNC'd ported and set up. Is Jeff at MCH still the best guy to do this and if so can anyone share his username so I can PM him (is that the best way?). cheers, thanks in advance. -------------------------------- Darren Beale Keith Black Racing Engines®

Re: Hemi Head CNC porting [Re: Keith Black®] #1355039 12/18/12 05:17 PM 12/18/12 05:17 PM
Joined: Feb 2006 Posts: 187 good ole USA M moparlifer member
moparlifer member M Joined: Feb 2006 Posts: 187 good ole USA	Jeff is the only guy to go to!!!!

Re: Hemi Head CNC porting [Re: moparlifer] #1355040 12/18/12 06:20 PM 12/18/12 06:20 PM
A Anonymous Unregistered
Anonymous Unregistered A	Jeff is the cat's azz. Definately who you want especially for those heads. I believe his username is moderncylinder if I remember correctly?

Re: Hemi Head CNC porting [Re: ] #1355041 12/18/12 07:52 PM 12/18/12 07:52 PM
Joined: Oct 2003 Posts: 614 ont,canada M mopartuner mopar
mopartuner mopar M Joined: Oct 2003 Posts: 614 ont,canada	Tim at FHO has a cnc and he is also very good with anything Hemi. 410 pump gas solis flat tappet cam 10.95 so far

Re: Hemi Head CNC porting [Re: mopartuner] #1355042 12/19/12 12:21 AM 12/19/12 12:21 AM
Joined: Dec 2007 Posts: 12,587 Great Neck,LI,new york hemi-itis I Live Here
hemi-itis I Live Here Joined: Dec 2007 Posts: 12,587 Great Neck,LI,new york	These guys mentioned are the best,just prepare for a long lead time HEMI-ITIS has no cure. My condition is fully BLOWN!!

Re: Hemi Head CNC porting [Re: hemi-itis] #1355043 12/19/12 02:15 AM 12/19/12 02:15 AM
A Anonymous Unregistered
Anonymous Unregistered A	Tim at FHO did my stage V big valve heads.

Re: Hemi Head CNC porting [Re: ] #1355044 12/19/12 08:07 AM 12/19/12 08:07 AM
Joined: Jun 2009 Posts: 1,212 QLD Australia Keith Black® OP pro stock
Keith Black® OP pro stock Joined: Jun 2009 Posts: 1,212 QLD Australia	thanks guys -------------------------------- Darren Beale Keith Black Racing Engines®

Re: Hemi Head CNC porting [Re: Keith Black®] #1355045 12/19/12 09:16 AM 12/19/12 09:16 AM
Joined: Jan 2003 Posts: 2,521 Richmond Va, KeislerTKO 60... V VanishPt master
VanishPt master V Joined: Jan 2003 Posts: 2,521 Richmond Va, KeislerTKO 60...	I had Tim At FHO also O ring the intake ports on the heads. Worked out great for those intake oil leak issues.

Re: Hemi Head CNC porting [Re: VanishPt] #1355046 12/20/12 07:28 PM 12/20/12 07:28 PM
Joined: Jun 2009 Posts: 1,212 QLD Australia Keith Black® OP pro stock
Keith Black® OP pro stock Joined: Jun 2009 Posts: 1,212 QLD Australia	I've PM'd Jeff on here ... does anyone also have his email address? if you could PM me with it I would appreciate it. I have also emailed Tim at FHO, not sure if he is a member here, thanks again -------------------------------- Darren Beale Keith Black Racing Engines®

Re: Hemi Head CNC porting [Re: Keith Black®] #1355047 12/20/12 10:02 PM 12/20/12 10:02 PM
Joined: Nov 2003 Posts: 915 Cincinnati OH B Bishop super stock
Bishop super stock B Joined: Nov 2003 Posts: 915 Cincinnati OH	Quote: I've PM'd Jeff on here ... does anyone also have his email address? if you could PM me with it I would appreciate it. I have also emailed Tim at FHO, not sure if he is a member here, thanks again moderncyl@aol.com

Re: Hemi Head CNC porting [Re: Bishop] #1355048 12/23/12 08:51 AM 12/23/12 08:51 AM
Joined: Mar 2003 Posts: 1,629 pa 572charger top fuel
572charger top fuel Joined: Mar 2003 Posts: 1,629 pa	hey mark any pics of the O ringing on the intake ports ? mine uses up the gaskets in a bout 2 months its suckin oil from the valley again , , not to hijack this thread ! 606 hemi pump gas best 9.60 at 142mph on motor 05 hemi daytona 1500 go-mango 4wd quadcab 2007 hotrod mag pump gas drags runner up, roadkill nights dodge big tire winner 2018 2019 back to back

Re: Hemi Head CNC porting [Re: 572charger] #1355049 12/24/12 08:57 AM 12/24/12 08:57 AM
Joined: Jan 2003 Posts: 2,521 Richmond Va, KeislerTKO 60... V VanishPt master
VanishPt master V Joined: Jan 2003 Posts: 2,521 Richmond Va, KeislerTKO 60...	here you go 7516498-IMG_1947.JPG (133 downloads)

Re: Hemi Head CNC porting [Re: VanishPt] #1355050 12/25/12 02:51 AM 12/25/12 02:51 AM
Joined: Jun 2009 Posts: 1,212 QLD Australia Keith Black® OP pro stock
Keith Black® OP pro stock Joined: Jun 2009 Posts: 1,212 QLD Australia	I like that ... Mark, how do you seal that .? do you have any more pics? Darren -------------------------------- Darren Beale Keith Black Racing Engines®

Re: Hemi Head CNC porting [Re: Keith Black®] #1355051 12/25/12 09:27 AM 12/25/12 09:27 AM
Joined: Mar 2003 Posts: 1,629 pa 572charger top fuel
572charger top fuel Joined: Mar 2003 Posts: 1,629 pa	thats what i need to do ! how thick is the o ring 3/16? thanks in advance jim 606 hemi pump gas best 9.60 at 142mph on motor 05 hemi daytona 1500 go-mango 4wd quadcab 2007 hotrod mag pump gas drags runner up, roadkill nights dodge big tire winner 2018 2019 back to back

Re: Hemi Head CNC porting [Re: 572charger] #1355052 12/25/12 10:55 AM 12/25/12 10:55 AM
Joined: Jan 2003 Posts: 2,521 Richmond Va, KeislerTKO 60... V VanishPt master
VanishPt master V Joined: Jan 2003 Posts: 2,521 Richmond Va, KeislerTKO 60...	.08 viton o ring material. I had these done about 2 years ago and they have not leaked. I just put a little smear of grease on the side of the intake so that it would slide down between the heads.

Re: Hemi Head CNC porting [Re: VanishPt] #1355053 12/25/12 12:38 PM 12/25/12 12:38 PM
Joined: Feb 2011 Posts: 1,454 Glendora Ca. J Just-a-dart pro stock
Just-a-dart pro stock J Joined: Feb 2011 Posts: 1,454 Glendora Ca.	Very nice, I like the double O-ring. "Just a Bracket car dressed up like a streetcar"

Re: Hemi Head CNC porting [Re: Just-a-dart] #1355054 12/29/12 04:48 AM 12/29/12 04:48 AM
Joined: Feb 2011 Posts: 59 Finland S studio57 member
studio57 member S Joined: Feb 2011 Posts: 59 Finland	i have For Hemis Only tim`s cnc ported Stage V head, i can reccomend him..

Re: Hemi Head CNC porting [Re: studio57] #1355055 12/29/12 08:14 AM 12/29/12 08:14 AM
Joined: Jun 2009 Posts: 1,212 QLD Australia Keith Black® OP pro stock
Keith Black® OP pro stock Joined: Jun 2009 Posts: 1,212 QLD Australia	Quote: i have For Hemis Only tim`s cnc ported Stage V head, i can reccomend him.. Thanks everyone just waiting on timing and pricing from both . Cheers -------------------------------- Darren Beale Keith Black Racing Engines®

Re: Hemi Head CNC porting [Re: Keith Black®] #1355056 12/29/12 09:31 AM 12/29/12 09:31 AM
Joined: Mar 2003 Posts: 1,629 pa 572charger top fuel
572charger top fuel Joined: Mar 2003 Posts: 1,629 pa	o ringing looks nice !! thanks for the info!! mine sucks oil from the valley after about 3 months of driving, pita 606 hemi pump gas best 9.60 at 142mph on motor 05 hemi daytona 1500 go-mango 4wd quadcab 2007 hotrod mag pump gas drags runner up, roadkill nights dodge big tire winner 2018 2019 back to back

Re: Hemi Head CNC porting [Re: 572charger] #1355057 12/29/12 11:29 AM 12/29/12 11:29 AM
Joined: Apr 2006 Posts: 3,675 Akron, Ohio U.S.A. roadhazard master
roadhazard master Joined: Apr 2006 Posts: 3,675 Akron, Ohio U.S.A.	Quote: o ringing looks nice !! thanks for the info!! mine sucks oil from the valley after about 3 months of driving, pita May want to try a better gasket Let me know if I can help you out

Page 1 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1