Hemi Head CNC porting

Hemi Head CNC porting - 12/18/12 09:14 PM

Hi everyone,
I need to get a set of Hemi Stage V (standard replacement heads) CNC'd ported and set up.
Is Jeff at MCH still the best guy to do this and if so can anyone share his username so I can PM him (is that the best way?).

cheers, thanks in advance.

Posted By: moparlifer

Re: Hemi Head CNC porting - 12/18/12 09:17 PM

Jeff is the only guy to go to!!!!

Posted By: Anonymous

Re: Hemi Head CNC porting - 12/18/12 10:20 PM

Jeff is the cat's azz. Definately who you want especially for those heads. I believe his username is moderncylinder if I remember correctly?

Posted By: mopartuner

Re: Hemi Head CNC porting - 12/18/12 11:52 PM

Tim at FHO has a cnc and he is also very good with anything Hemi.

Posted By: hemi-itis

Re: Hemi Head CNC porting - 12/19/12 04:21 AM

These guys mentioned are the best,just prepare for a long lead time

Posted By: Anonymous

Re: Hemi Head CNC porting - 12/19/12 06:15 AM

Tim at FHO did my stage V big valve heads.

Posted By: Keith Black®

Re: Hemi Head CNC porting - 12/19/12 12:07 PM

thanks guys

Posted By: VanishPt

Re: Hemi Head CNC porting - 12/19/12 01:16 PM

I had Tim At FHO also O ring the intake ports on the heads. Worked out great for those intake oil leak issues.

Posted By: Keith Black®

Re: Hemi Head CNC porting - 12/20/12 11:28 PM

I've PM'd Jeff on here ... does anyone also have his email address? if you could PM me with it I would appreciate it.
I have also emailed Tim at FHO, not sure if he is a member here,

thanks again

Posted By: Bishop

Re: Hemi Head CNC porting - 12/21/12 02:02 AM

Quote:

I've PM'd Jeff on here ... does anyone also have his email address? if you could PM me with it I would appreciate it.
I have also emailed Tim at FHO, not sure if he is a member here,

thanks again

moderncyl@aol.com

Posted By: 572charger

Re: Hemi Head CNC porting - 12/23/12 12:51 PM

hey mark any pics of the O ringing on the intake ports ? mine uses up the gaskets in a bout 2 months its suckin oil from the valley again , , not to hijack this thread !

Posted By: VanishPt

Re: Hemi Head CNC porting - 12/24/12 12:57 PM

here you go

Posted By: Keith Black®

Re: Hemi Head CNC porting - 12/25/12 06:51 AM

I like that ... Mark, how do you seal that .? do you have any more pics?
Darren

Posted By: 572charger

Re: Hemi Head CNC porting - 12/25/12 01:27 PM

thats what i need to do ! how thick is the o ring 3/16? thanks in advance jim

Posted By: VanishPt

Re: Hemi Head CNC porting - 12/25/12 02:55 PM

.08 viton o ring material. I had these done about 2 years ago and they have not leaked.

I just put a little smear of grease on the side of the intake so that it would slide down between the heads.

Posted By: Just-a-dart

Re: Hemi Head CNC porting - 12/25/12 04:38 PM

Very nice, I like the double O-ring.

Posted By: studio57

Re: Hemi Head CNC porting - 12/29/12 08:48 AM

i have For Hemis Only tim`s cnc ported Stage V head, i can reccomend him..

Posted By: Keith Black®

Re: Hemi Head CNC porting - 12/29/12 12:14 PM

Quote:

i have For Hemis Only tim`s cnc ported Stage V head, i can reccomend him..

Thanks everyone just waiting on timing and pricing from both . Cheers

Posted By: 572charger

Re: Hemi Head CNC porting - 12/29/12 01:31 PM

o ringing looks nice !! thanks for the info!! mine sucks oil from the valley after about 3 months of driving, pita

Posted By: roadhazard

Re: Hemi Head CNC porting - 12/29/12 03:29 PM

Quote:

o ringing looks nice !! thanks for the info!! mine sucks oil from the valley after about 3 months of driving, pita

May want to try a better gasket

Let me know if I can help you out

Posted By: Keith Black®

Re: Hemi Head CNC porting - 12/29/12 10:20 PM

Quote:

here you go

Yep thanks Mark for emailing me the pic, I will get this done too. Are they stage v Replacement heads? The intakes look huge..

Posted By: VanishPt

Re: Hemi Head CNC porting - 12/30/12 12:36 AM

Stage V replacements. I also had Tim port the Stage V 2-4 intake .