Re: Low Deck 400 Combos....
[Re: Cab_Burge]
#1346817
12/11/12 12:19 AM
12/11/12 12:19 AM
|
Joined: Jul 2012
Posts: 153 Plant city fl
70Dart499
OP
member
|
OP
member
Joined: Jul 2012
Posts: 153
Plant city fl
|
OK, thanks for clearing that up with the Eddy RPM's my pistons are Flat top so I would be fine.
1970 Dart Drag Car
|
|
|
Re: Low Deck 400 Combos....
[Re: Thumperdart]
#1346822
12/11/12 03:32 PM
12/11/12 03:32 PM
|
Joined: May 2004
Posts: 3,210 robin hood country
deaks
master
|
master
Joined: May 2004
Posts: 3,210
robin hood country
|
440 Jim, has, i reckon one of the best running combos on this site, Cudadon, Dom and Prosport's old dartsport aren't far behind. Mick
69 Dart GTS 440 mopar .590 cam, Edelbrock heads, 3200# best et 6.45, 106.78, 10.14, 132.88 mph, 1.47 60ft best 60ft 1.36
|
|
|
Re: Low Deck 400 Combos....
[Re: Thumperdart]
#1346824
12/11/12 04:38 PM
12/11/12 04:38 PM
|
Joined: Dec 2011
Posts: 268 ca
brownout
enthusiast
|
enthusiast
Joined: Dec 2011
Posts: 268
ca
|
I would have to agree with that.
Thumper that would be impressive if you can get it to run 9.50s whats your car got underneath it cal tracs?
Yea i am thinking in the low 700 lift range with some 1.6 rockers for the cam should run alright
Last edited by brownout; 12/11/12 04:41 PM.
|
|
|
Re: Low Deck 400 Combos....
[Re: brownout]
#1346825
12/11/12 04:48 PM
12/11/12 04:48 PM
|
Joined: Jul 2004
Posts: 19,318 State of confusion
Thumperdart
I Live Here
|
I Live Here
Joined: Jul 2004
Posts: 19,318
State of confusion
|
I`m not saying it will 4 sure but after dialin in my carb and when I re-do the interior,take a few lbs. out and loosten up the ft. end it SHOULD go that fast............. Yes, cal-tracs and old 5-way Ranchos.............
Last edited by Thumperdart; 12/11/12 04:49 PM.
72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....
|
|
|
Re: Low Deck 400 Combos....
[Re: rebel]
#1346830
12/12/12 08:49 AM
12/12/12 08:49 AM
|
Joined: Jan 2003
Posts: 10,013 Frostbitefalls MN (Rocky&Bullw...
gregsdart
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,013
Frostbitefalls MN (Rocky&Bullw...
|
My old 499 combo- 4.15 stroke, 12.5 / 1 comp, bowl porting only on 440-1 heads, 319 flow at .600 Ultradyne roller with about 283/290/108 and 760 intake lift, single Domintor intake and fuel injected on alky. 3000 lb car ran 9.30 at 144 mph best.
8..603 156 mph best, 2905 lbs 549, indy 572-13, alky
|
|
|
Re: Low Deck 400 Combos....
[Re: gregsdart]
#1346831
12/12/12 03:21 PM
12/12/12 03:21 PM
|
Joined: Jan 2003
Posts: 19,379 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,379
Las Vegas
|
Guess I could post the Valiant combo. Was a stock 400low deck block, aluminum caps, 4.25 stroke, GRP rods, JE pistons at 13.5-1, B1 originals flowed 419 at .800", LSM roller 288/294 750/777 on a 113, cast single 4 and 1150 dominator. Powerdlide with 6200 stall and Dana 60 with a 4.30 gear, MT 29.5x10.5 tire. Car weighed 3470 went 9.04 at 149.
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
Re: Low Deck 400 Combos....
[Re: Al_Alguire]
#1346832
12/12/12 04:27 PM
12/12/12 04:27 PM
|
Joined: Aug 2008
Posts: 4,073 Mo.
racerx
master
|
master
Joined: Aug 2008
Posts: 4,073
Mo.
|
Quote:
Guess I could post the Valiant combo. Was a stock 400low deck block, aluminum caps, 4.25 stroke, GRP rods, JE pistons at 13.5-1, B1 originals flowed 419 at .800", LSM roller 288/294 750/777 on a 113, cast single 4 and 1150 dominator. Powerdlide with 6200 stall and Dana 60 with a 4.30 gear, MT 29.5x10.5 tire. Car weighed 3470 went 9.04 at 149.
At what weight?
|
|
|
Re: Low Deck 400 Combos....
[Re: Thumperdart]
#1346836
12/14/12 02:47 PM
12/14/12 02:47 PM
|
Joined: Jan 2003
Posts: 19,379 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,379
Las Vegas
|
Dom you really need to bring that thing to the MATS this year. True Street Challenge is calling your name. Need to contact whichever magazine does this deal. Would love to see you come and take that deal.
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
|
|