Billet crank - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Billet crank

Print Thread

Billet crank #1346152 12/04/12 11:48 PM 12/04/12 11:48 PM
Joined: Nov 2007 Posts: 317 Indiana 7 79_W200 OP enthusiast
79_W200 OP enthusiast 7 Joined: Nov 2007 Posts: 317 Indiana	I am planning a new build and had 2 builders recommend that I go with a billet crank. Was thinking of using Bryant but saw Ohio crankshaft has a billet for 1595 has anyone used these were they good quality I will be running a 3.75 stroke in a 8500-9500 rpm range 1979 W200 470

Re: Billet crank [Re: 79_W200] #1346153 12/05/12 12:02 AM 12/05/12 12:02 AM
Joined: Apr 2005 Posts: 1,106 Quebec, Canada D Diablo super stock
Diablo super stock D Joined: Apr 2005 Posts: 1,106 Quebec, Canada	Hard to go wrong with Bryant my good man! Be prepared to wait for it though.

Re: Billet crank [Re: Diablo] #1346154 12/05/12 12:29 AM 12/05/12 12:29 AM
Joined: Nov 2003 Posts: 10,384 Upstate NY Bigcube I Live Here
Bigcube I Live Here Joined: Nov 2003 Posts: 10,384 Upstate NY	I second Bryant. For that kind of RPM I would get a fully counter weighted one, your block will thank you. Jim

Re: Billet crank [Re: Bigcube] #1346155 12/05/12 05:37 AM 12/05/12 05:37 AM
Joined: Jan 2003 Posts: 6,142 Melbourne , Australia LA360 master
LA360 master Joined: Jan 2003 Posts: 6,142 Melbourne , Australia	Bryant or Winberg. If I was after something a little cheaper than I would look at a Callies or King. *I fixed it, thanks for pointing that out! * Last edited by LA360; 12/06/12 07:47 PM. Alan Jones

Re: Billet crank W-I-N-B-E-R-G [Re: LA360] #1346156 12/05/12 12:54 PM 12/05/12 12:54 PM
Joined: Jan 2003 Posts: 16,376 D dogdays I Live Here
dogdays I Live Here D Joined: Jan 2003 Posts: 16,376	Winberg has no "d". He used to be pretty busy as well and was building some really high dollar cranks for racers. R

Re: Billet crank [Re: 79_W200] #1346157 12/05/12 01:33 PM 12/05/12 01:33 PM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	I have been using Winberg, and can tell you they absolutely put out a great piece.( and you support a Mopar racer by buying from them) Nothing at all wrong with Bryant, very nice as well. Also have got some Crower billets, but the wait on them is crazy. RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Re: Billet crank [Re: CompWedgeEngines] #1346158 12/05/12 02:03 PM 12/05/12 02:03 PM
Joined: Feb 2006 Posts: 784 Liverpool, NY S SILVER67 super stock
SILVER67 super stock S Joined: Feb 2006 Posts: 784 Liverpool, NY	Winberg 7490212-photo.JPG (82 downloads)

Re: Billet crank [Re: SILVER67] #1346159 12/05/12 09:12 PM 12/05/12 09:12 PM
Joined: Nov 2004 Posts: 3,619 Norwich CT USA Defbob master
Defbob master Joined: Nov 2004 Posts: 3,619 Norwich CT USA	full counter weights My Bryant crank didn't come polished 7490807-6-09-08-02.JPG (85 downloads)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1