Billet crank

I am planning a new build and had 2 builders recommend that I go with a billet crank. Was thinking of using Bryant but saw Ohio crankshaft has a billet for 1595 has anyone used these were they good quality I will be running a 3.75 stroke in a 8500-9500 rpm range

Hard to go wrong with Bryant my good man! Be prepared to wait for it though.

I second Bryant. For that kind of RPM I would get a fully counter weighted one, your block will thank you.

Bryant or Winberg. If I was after something a little cheaper than I would look at a Callies or King.

***I fixed it, thanks for pointing that out! ***

Winberg has no "d". He used to be pretty busy as well and was building some really high dollar cranks for racers.

R

I have been using Winberg, and can tell you they absolutely put out a great piece.( and you support a Mopar racer by buying from them) Nothing at all wrong with Bryant, very nice as well. Also have got some Crower billets, but the wait on them is crazy.

Winberg

full counter weights

My Bryant crank didn't come polished