Re: Is either 318 better than another?
[Re: MOPAR_AMC_FAN]
#1264549
07/09/12 10:10 AM
07/09/12 10:10 AM
|
Joined: Jan 2003
Posts: 16,123 Grand Haven, MI
patrick
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,123
Grand Haven, MI
|
Quote:
I found a 77 Aspen with a stock 90K+ mile 318 in it that I'm thinking of picking up. Since I'd want a little more performance, I started thinking up a combo for it. I already have a Performer intake and was thinking of going with a small summit cam and lifter combo (SUM-6900) for now. Thing is, I also have a rebuilt roller cam 318 with 302 heads on it in my possesion. I also have another roller cam that I could have reground for it or I do like the Lunati roller cams (either the 60710 or the 60711).
Soooo, my question is, is one 318 better than the other? I'm thinking the roller 318 would be a bit better with the roller cam and the decent 302 heads, but would it be a noticeable difference over the 77 318? Either engine would be getting headers, but I'd probably do the cam first. Oh, and the 360 would come later on.
the roller 318 has the better, smaller chamber 302 heads. the piston's compression height is also about .010" taller than the '77's....it should be very close to a true 9:1, if not a little over if you use the .028" thick head gaskets. I'd run the roller motor with either a bullet regrind or the lunati cams mentioned. for valve springs, I'd use the Hughes #1110 springs.
1976 Spinnaker White Plymouth Duster, /6 A833OD 1986 Silver/Twilight Blue Chrysler 5th Ave HotRod **SOLD!*** 2011 Toxic Orange Dodge Charger R/T 2017 Grand Cherokee Overland 2014 Jeep Cherokee Latitude (holy crap, my daughter is driving)
|
|
|
Re: Is either 318 better than another?
[Re: patrick]
#1264550
07/09/12 11:28 AM
07/09/12 11:28 AM
|
Joined: May 2003
Posts: 15,487 Florida
scratchnfotraction
I Live Here
|
I Live Here
Joined: May 2003
Posts: 15,487
Florida
|
Hi Brian I like the 1990-107,000 mile- JY 318/#302 head engine I just stuck the lunati 60710 roller cam in 6 month ago. I went with the comp 901-16 with the voodoo cam. my old 85 stepside is fun to drive with that little combo. the 60710 worked great in a 318 with 360 heads as well,the 360 headed 318 had a little more top end and revs faster. the #302 headed 318 has a little more low end and will turn right up to 5500 rpm. IMHO,any 318 after 85 is the better engine. it has a roller cam and more comp ratio with a better comb chamber with the same small valves. I rather swap a whole engine than do a cam R&R while its in the car.
|
|
|
|
|