Indy Valley Cover? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Indy Valley Cover?

Print Thread

Indy Valley Cover? #1161998 01/21/12 02:27 PM 01/21/12 02:27 PM
Joined: Jan 2003 Posts: 1,807 North Dakota Azzkikrcuda OP top fuel
Azzkikrcuda OP top fuel Joined: Jan 2003 Posts: 1,807 North Dakota	Does Indys Cast Aluminum Valley Cover work with Edelbrock/Stealth heads?

Re: Indy Valley Cover? [Re: Azzkikrcuda] #1161999 01/21/12 02:59 PM 01/21/12 02:59 PM
Joined: Aug 2003 Posts: 43,157 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,157 Bend,OR USA	Quote: Does Indys Cast Aluminum Valley Cover work with Edelbrock/Stealth heads? Not really, there around 1/4 to 3/8 inch clearance between the edge of the plate and the heads Those heads do not have the bottom of the heads machined to seal to that plate and they don't stick out far enough to slide a plate under them like the Indy heads do to seal them up I just thought of something else, if yuor building a low deck motor the RB(440) plate might work if your willing and able to work on it to make it work Lets us knwo what you end up doing and the results Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: Indy Valley Cover? [Re: Cab_Burge] #1162000 01/21/12 05:29 PM 01/21/12 05:29 PM
Joined: Jan 2003 Posts: 1,807 North Dakota Azzkikrcuda OP top fuel
Azzkikrcuda OP top fuel Joined: Jan 2003 Posts: 1,807 North Dakota	This is on a 440.

Re: Indy Valley Cover? [Re: Azzkikrcuda] #1162001 01/22/12 12:17 PM 01/22/12 12:17 PM
Joined: Jan 2005 Posts: 716 Indiana 6 65dragnet super stock
65dragnet super stock 6 Joined: Jan 2005 Posts: 716 Indiana	Yes I've used an Indy valley plate on my 400 with Eddy heads E. Williams 65 Coronet 500 3400lbs w/d, 446, Indy EZ'S, A&A transbrake,Comp 650 lift cam, 6.50 @ 105 mph 1/8th 10.25 @ 130mph 1/4

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1