New Cam
#1085393
09/29/11 10:16 PM
09/29/11 10:16 PM
|
Joined: Dec 2008
Posts: 415 Peru
cbarracuda
OP
mopar
|
OP
mopar
Joined: Dec 2008
Posts: 415
Peru
|
Installed my new cam shaft today. I had to pulled the motor out. The guys of competition cams told me it needed a little bit of grinding for the roller lifter, so I did just a little bit and everything is fine. This is the first time I install my Cam straight up at 106 degrees, no advance. the roller has 268 duration at 0.50 and 276 exhaust, custome grind. My old cam was a Mopar solid 590 for the last six years. No complains with the Mopar.
Last edited by cbarracuda; 09/29/11 10:17 PM.
|
|
|
Re: New Cam
[Re: cbarracuda]
#1085397
09/30/11 12:13 AM
09/30/11 12:13 AM
|
Joined: Nov 2003
Posts: 6,293 Rock Springs
Bob_Coomer
master
|
master
Joined: Nov 2003
Posts: 6,293
Rock Springs
|
Why not just run the tie bars facing away from the block? I have run them like that many, many times in a big block. I mean how does the wheel and cam know which way the tie bar is facing? What did Comp say?
[color:"red"]65 Hemi Belvedere coming soon [/color] [color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]
|
|
|
Re: New Cam
[Re: Bob_Coomer]
#1085398
09/30/11 12:20 AM
09/30/11 12:20 AM
|
Joined: Dec 2008
Posts: 415 Peru
cbarracuda
OP
mopar
|
OP
mopar
Joined: Dec 2008
Posts: 415
Peru
|
small block, not a big block the push rod will hit the tie bar diferen angle
Last edited by cbarracuda; 09/30/11 12:27 AM.
|
|
|
Re: New Cam
[Re: cbarracuda]
#1085399
09/30/11 12:50 AM
09/30/11 12:50 AM
|
Joined: Nov 2003
Posts: 6,293 Rock Springs
Bob_Coomer
master
|
master
Joined: Nov 2003
Posts: 6,293
Rock Springs
|
Gotcha... I figured there was a reason... Nice looking setup... Good Luck
[color:"red"]65 Hemi Belvedere coming soon [/color] [color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]
|
|
|
Re: New Cam
[Re: cbarracuda]
#1085400
09/30/11 01:22 AM
09/30/11 01:22 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Looks good... I glue screen into the intake valley to cover the holes so if you break anything in the top like a push rod or rockers or lash caps (if you use them) so it cant get in the cam or crank and cause more problems
|
|
|
Re: New Cam
[Re: cbarracuda]
#1085403
09/30/11 10:36 AM
09/30/11 10:36 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Good Idea. what kind of cement? something like JB welding?
Yeah I use JB Weld... make sure you run the screen up the back wall also
|
|
|
Re: New Cam
[Re: Ian]
#1085404
09/30/11 07:50 PM
09/30/11 07:50 PM
|
Joined: Dec 2008
Posts: 415 Peru
cbarracuda
OP
mopar
|
OP
mopar
Joined: Dec 2008
Posts: 415
Peru
|
Quote:
what power increase do you think it will make over flat tappet ,what comp has she got ,what has been your ets,
power increase maybe 30 to 35 HP. My ET's are low tenths. There is no tracsion on this airport. My comp part number for the Cam is #20-000-9, grind CRS-4207/4205 R 106.0 In your video looks like you are using a 3 links Australian suspension, how well do they work? My friend let me borrow one today and I'm putting it on my car for the next race.
|
|
|
Re: New Cam
[Re: 70blackfish]
#1085408
10/01/11 01:43 AM
10/01/11 01:43 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
do small blocks need a cam Button?
No we use a thrust plate to control the cam movement
|
|
|
Re: New Cam
[Re: Ian]
#1085412
10/01/11 08:30 PM
10/01/11 08:30 PM
|
Joined: Dec 2008
Posts: 415 Peru
cbarracuda
OP
mopar
|
OP
mopar
Joined: Dec 2008
Posts: 415
Peru
|
Quote:
it is a homemade caltrac on it with split mono leafs .there is a 3 link i will post a link to it .
the 3 link tracsion system is in the bigblockdart.com on the tech page rear suspension. Easy to install in a couple of hours
|
|
|
|
|