1/2 alum fuel line without a bender? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 1/2 alum fuel line without a bender?

Print Thread

Page 2 of 2

1

2

Re: 1/2 alum fuel line without a bender? [Re: POS Dakota] #1054580 08/18/11 10:04 AM 08/18/11 10:04 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Quote: Quote: Scratch'n, that's fine for the street but it won't pass tech. There can't be any fuel components mounted on the firewall in line with the flywheel/converter area - I think it has to be 6" in front (or behind). They don't want brake lines run across the firewall (over top the bellhousing area), either. Not trying to nit-pick - just a heads up to anyone who is going to try to pass tech. What about fuel line? Is there a requirement for what line to run and where it's to be put as it passes the flywheel area? You can run the fuel line across that area IF you put the line in a steel tube... I forget what thickness the steel has to be.... either 1/8 wall or 1/4" BUT they wont pass with the regulator on the firewall... must be 6" forward of it Last edited by MR_P_BODY; 08/18/11 10:07 AM.

Re: 1/2 alum fuel line without a bender? [Re: MR_P_BODY] #1054581 08/18/11 12:48 PM 08/18/11 12:48 PM
Joined: Dec 2009 Posts: 1,074 detroit, mi POS Dakota super stock
POS Dakota super stock Joined: Dec 2009 Posts: 1,074 detroit, mi	Quote: Quote: Quote: Scratch'n, that's fine for the street but it won't pass tech. There can't be any fuel components mounted on the firewall in line with the flywheel/converter area - I think it has to be 6" in front (or behind). They don't want brake lines run across the firewall (over top the bellhousing area), either. Not trying to nit-pick - just a heads up to anyone who is going to try to pass tech. What about fuel line? Is there a requirement for what line to run and where it's to be put as it passes the flywheel area? You can run the fuel line across that area IF you put the line in a steel tube... I forget what thickness the steel has to be.... either 1/8 wall or 1/4" BUT they wont pass with the regulator on the firewall... must be 6" forward of it Thank You. Mine will be largely street driven, but I am going to the track occasionally too. I dont want to be told to take a hike when I have a lot of money in various SFI parts already.

Re: 1/2 alum fuel line without a bender? [Re: POS Dakota] #1054582 08/19/11 04:47 PM 08/19/11 04:47 PM
Joined: Jan 2003 Posts: 8,849 poplar bluff mo. T toplescuda OP I Whine
toplescuda OP I Whine T Joined: Jan 2003 Posts: 8,849 poplar bluff mo.	well a water pump pulley is the smallest thing ihad that would not kink dont know if would pass tech but its gonna get routed in same place the factory i took off was except im not gonna try to route in the torsion bar crossmember like factory did 1970 barracuda convert. 1 of 59 1970 pro street A.A.R. clone (panther pink) 1971 charger 2015 hellcat challenger. Redline red 2014 quad cab 4x4 ram 8 speed hemi

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1