Help me identify a master cylinder please. - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Help me identify a master cylinder please.

Print Thread

Help me identify a master cylinder please. #1015771 06/18/11 07:23 PM 06/18/11 07:23 PM
Joined: Jan 2003 Posts: 5,357 Rancho Cordova, California (Sa... hemi71x OP master
hemi71x OP master Joined: Jan 2003 Posts: 5,357 Rancho Cordova, California (Sa...	I got this master cylinder with some disc brake parts that i purchased. I don't know if it's for a disc - drum, application, or for a drum - drum application. Also need to know if it's for a power brake application, or a regular manual brake application. A casting number on the bottom is 29861 which i'm pretty sure is a Raybestos number, and that seems to show up as MC36221, but i can't find out what it's used on. Can anyone reference it for me? Thank's in advance. Jim V. 6688893-Calipers&Spindles&Hubs&M.C006[640x480].jpg (308 downloads) RF-4C Phantom 69-370 Zweibrucken, Germany

Re: Help me identify a master cylinder please. [Re: hemi71x] #1015772 06/18/11 09:51 PM 06/18/11 09:51 PM
Joined: Jun 2008 Posts: 3,916 usa L lewtot184 master
lewtot184 master L Joined: Jun 2008 Posts: 3,916 usa	looks like a drum/drum. it can be used with drum/drum power brakes.

Re: Help me identify a master cylinder please. [Re: hemi71x] #1015773 06/19/11 05:33 PM 06/19/11 05:33 PM
Joined: Jan 2003 Posts: 25,836 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,836 Rio Linda, CA	In the link below, click on INFO to see the applications. http://www.rockauto.com/catalog/raframec...-MC36221-230437 The INTERNET, the MISinformation superhighway

Re: Help me identify a master cylinder please. [Re: John_Kunkel] #1015774 05/14/13 01:25 PM 05/14/13 01:25 PM
Joined: Jan 2003 Posts: 5,186 Wherever I am. J Junky master
Junky master J Joined: Jan 2003 Posts: 5,186 Wherever I am.	Quote: In the link below, click on INFO to see the applications. http://www.rockauto.com/catalog/raframec...-MC36221-230437 Thank you. 2010 Black Challenger SE <> 3.5 V6 Custom Shift Knobs www.flameball.com Check It Out

Re: Help me identify a master cylinder please. [Re: hemi71x] #1015775 05/15/13 11:14 AM 05/15/13 11:14 AM
Joined: Jan 2003 Posts: 75,034 U.S.S.A. JohnRR I Win
JohnRR I Win Joined: Jan 2003 Posts: 75,034 U.S.S.A.	Jim , when you pop the cover are the res. the same size or different ?

Re: Help me identify a master cylinder please. [Re: hemi71x] #1015776 05/15/13 11:29 AM 05/15/13 11:29 AM
Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska	Quote: Also need to know if it's for a power brake application, or a regular manual brake application. Look inside the piston recess in the back & if it's smooth like a tapered sewing thimble then it is a PB app & cannot be used on manual brakes as there's no groove to lock in the neoprene retainer. If it has a wide/shallow circular recessed depression about halfway down then it is a manual brake app as that is the groove that the retainer locks into but can also be used in a PB app since power brakes dont use the neoprene retainer on the end of the pushrod (assuming the bore dia is or close to what you need for your system which for the most part depends on the caliper type/bore dia/drum size/wheel cyl dia/pedal effort/feel desired etc) live every 24 hour block of time like it's your last day on earth

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1