The blankets are from VSracing, popular vendor on tmf, affordable but supposed to be good.

Yes, they are those silly little turbos. The OEM Ford waste gates would have been even harder to install actually. The turbos would not have fit where I wanted them with the big arm and can off the side, and the tiny wg feed probably would not have done the job. The cast iron downpipe elbow assemblies also clocked everything all wrong. I did look at using some straight off wg actuators and dp flanges, but it was going to take a decent amount of work to fit those as well, and they would have been a performance compromise. So, I decided to spend the effort and money on the best performing solution, and one that I would not have to change if I find these turbos to be radically too small.