Quote:
Quote:
Bottom pic is correct. The top pic shows the inner sleeve on the bushing has been pressed out the back side..........That bushing needs to be replaced properly.
I agree with Jim....
The magazine article referenced above does show the bushing fully installed & it still exposes the stepped shoulder...
Totally agree. That pin is stepped and the bottom pic is right. I've done at least 4 sets and they all looked like the bottom pic when done. Pressed pin into bushing then pin/bushing assembly into LCA.
R.I.P.- Gary "Coop" Davis 02/09/68-05/13/04
| 
