just remember the msd start switch will need to see 12 volts both went the key goes to start and went the key is on run...

some 12 volt circuits go to zero volts went the key goes to start...

take the two wires from the ballast resistor...run and start ...and connect both wires to the msd start switch...

Tony

70 AARCuda Vitamin C
71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield)
71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas)
71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)