I run a 28x10.5 MT ET Drag now, and wanted something just a tad wider if possible. The 295 shows 11" of tread and 12.2" of section width on a 10" rim. My 28x10.5 are 10" tread and 11.7" of section width, so it looks like you can get a full inch of tread for a 1/2 inch of section. I am thinking I can get those in there with just an offset spring kit, as I have about a half inch now between the tire and spring and about an inch and half between the tire and back of the fenderwell.

'75 Plymouth Duster
Phase I 451 906/590/2-660 10.75/126
Phase II 451 Stage VI/590/1050 9.82/135
Phase III 383 906/Victor-Pump gas 11.30/119

"For by grace you have been saved through faith. And this is not your own doing; it is the gift of God,"