Quote:

Do your self a favor and talk to an expert..Call Tim at Bullit cams ,,he's done a ton of small block cams ,,Knows his stuff..662-893-8022



This would be my advice.
Make a call to someone who is an expert.
Strokers love duration , so I think you might be leaving a little on the table here.
My 405 will be a solid roller , but we settled on 268* @.050 and .668 lift with 1.6's.
106 LSA.
And my heads will flow significantly more than yours. ( Ported W-9's )
He was for a little more separation and suggested 108 , but my motor will see limited street use and have a looser converter so after some discussion , this is what we decided to go with.
It is a decision I would never make on my own , and though it is close to what I had in mind , it is more aggressive..........no dyno #'s yet , but I have high expectations.
Having your flow numbers makes it much less of a guess too.