Can 5 on 4" axles be drilled to 5 on 4.5"?

Print Thread

Re: Can 5 on 4" axles be drilled to 5 on 4.5"? [Re: NFURY8] #78759 06/23/08 02:02 PM 06/23/08 02:02 PM
Joined: Sep 2003 Posts: 1,615 Table Rock Lake Missouri F furious top fuel
furious top fuel F Joined: Sep 2003 Posts: 1,615 Table Rock Lake Missouri	Sure, we used to do it all the time, before there were so many options.

Entire Thread
Subject	Posted By	Posted
Can 5 on 4" axles be drilled to 5 on 4.5"?	NFURY8	06/23/08 06:01 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	furious	06/23/08 06:02 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	MoparforLife	06/23/08 06:26 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	mopar346	06/24/08 12:06 AM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	Phil Saran	06/24/08 12:56 AM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	RUNCHARGER	06/24/08 02:54 AM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	MoparforLife	06/24/08 12:48 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	autoxcuda	06/25/08 06:53 AM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	Jim_Lusk	06/24/08 02:46 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	NFURY8	06/24/08 05:33 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	DoctorDiff	06/25/08 05:19 AM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	BobR	06/25/08 02:09 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	JCFcuda	06/25/08 02:35 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	BobR	06/26/08 12:23 AM

Hop To