Can 5 on 4" axles be drilled to 5 on 4.5"?

Print Thread

Re: Can 5 on 4" axles be drilled to 5 on 4.5"? [Re: NFURY8] #78767 06/25/08 01:19 AM 06/25/08 01:19 AM
Joined: Jan 2003 Posts: 8,016 Polson, MT DoctorDiff master
DoctorDiff master Joined: Jan 2003 Posts: 8,016 Polson, MT	I stock high-strength 5 x 4 1/2" A-body axles with bearings and studs installed. E-mail me if you are interested. Contact info

Entire Thread
Subject	Posted By	Posted
Can 5 on 4" axles be drilled to 5 on 4.5"?	NFURY8	06/23/08 06:01 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	furious	06/23/08 06:02 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	MoparforLife	06/23/08 06:26 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	mopar346	06/24/08 12:06 AM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	Phil Saran	06/24/08 12:56 AM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	RUNCHARGER	06/24/08 02:54 AM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	MoparforLife	06/24/08 12:48 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	autoxcuda	06/25/08 06:53 AM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	Jim_Lusk	06/24/08 02:46 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	NFURY8	06/24/08 05:33 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	DoctorDiff	06/25/08 05:19 AM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	BobR	06/25/08 02:09 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	JCFcuda	06/25/08 02:35 PM
Re: Can 5 on 4" axles be drilled to 5 on 4.5"?	BobR	06/26/08 12:23 AM

Hop To