tranny lines and firing up motor

Print Thread

Re: tranny lines and firing up motor [Re: chache876] #739374 07/03/10 05:57 PM 07/03/10 05:57 PM
Joined: Jan 2003 Posts: 25,995 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,995 Rio Linda, CA	If you run it in Neutral with the driveshaft disconnected from the rearend the shaft will turn due to the "windmilling" effect in the transmission. If you could find a way to support the driveshaft and keep it from turning you'd be OK. The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
tranny lines and firing up motor	hemi68charger	07/03/10 04:16 PM
Re: tranny lines and firing up motor	dOc …	07/03/10 04:19 PM
Re: tranny lines and firing up motor	451Mopar	07/03/10 04:25 PM
Re: tranny lines and firing up motor	Locomotion	07/03/10 04:27 PM
Re: tranny lines and firing up motor	okie	07/03/10 06:36 PM
Re: tranny lines and firing up motor	John_Kunkel	07/03/10 06:59 PM
Re: tranny lines and firing up motor	chache876	07/03/10 08:35 PM
Re: tranny lines and firing up motor	John_Kunkel	07/03/10 09:57 PM
Re: tranny lines and firing up motor	chache876	07/03/10 10:12 PM
Re: tranny lines and firing up motor	demonH1B	07/04/10 02:06 PM

Hop To