tranny lines and firing up motor

Print Thread

Re: tranny lines and firing up motor [Re: hemi68charger] #739370 07/03/10 12:27 PM 07/03/10 12:27 PM
Joined: Jan 2003 Posts: 5,898 Florida Locomotion master
Locomotion master Joined: Jan 2003 Posts: 5,898 Florida	Make sure the rubber line is secure on the ends so it doesn't blow off. Not sure if plain rubber fuel line hose will take the pressure itself because trans fluid pressure can be 100-150 psi.

Entire Thread
Subject	Posted By	Posted
tranny lines and firing up motor	hemi68charger	07/03/10 04:16 PM
Re: tranny lines and firing up motor	dOc …	07/03/10 04:19 PM
Re: tranny lines and firing up motor	451Mopar	07/03/10 04:25 PM
Re: tranny lines and firing up motor	Locomotion	07/03/10 04:27 PM
Re: tranny lines and firing up motor	okie	07/03/10 06:36 PM
Re: tranny lines and firing up motor	John_Kunkel	07/03/10 06:59 PM
Re: tranny lines and firing up motor	chache876	07/03/10 08:35 PM
Re: tranny lines and firing up motor	John_Kunkel	07/03/10 09:57 PM
Re: tranny lines and firing up motor	chache876	07/03/10 10:12 PM
Re: tranny lines and firing up motor	demonH1B	07/04/10 02:06 PM

Hop To