I am trying to bleed my brake system...all new wheel cylinders, lines, hoses and the Master Cylinder was rebuilt. The system was completely dry.

I bench bled the MC..the front bowl had alot of bubbles but the rear didn't do much of anything. Installed MC on car and then tried vacuul bleeding the RR...hose jumped off and rewarded me with a shower of brake fluid.

So I tried the gravity bleed...again started at RR...saw a few bubbles at first but then nothing however fluid on front bowl of MC kept going down and refilled over and over...the bottle at RR had more fluid then I began with so I moved to LR...not much happened there. Tried RF and got nothing...the rear bowl isn't draining.

I'm this close to letting the shop do it.

Was thinking I could try the two person method this weekend with my son pushing the pedal down with MC cap on and then open a bleeder...then close bleeder and tell him to let the pedal up and do again...periodically refilling MC.

Any suggestions? Pretty frustrated.