Bending push rods BB engine with hydraulic roller cam

Print Thread

Re: Bending push rods BB engine with hydraulic roller cam [Re: ChrisDavis] #668920 04/15/10 02:47 PM 04/15/10 02:47 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	I used to spin a 11:1 383 iron headed dart w/ a 509 to 6800 using stock rockers, push rods and shafts. Never floated and never bent anything

Entire Thread
Subject	Posted By	Posted
Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/13/10 09:10 PM
Re: Bending push rods BB engine with hydraulic roller cam	rth	04/13/10 09:25 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/15/10 03:34 PM
Re: Bending push rods BB engine with hydraulic roller cam	moper	04/15/10 04:03 PM
Re: Bending push rods BB engine with hydraulic roller cam	Dodgem	04/15/10 04:04 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/15/10 04:20 PM
Re: Bending push rods BB engine with hydraulic roller cam	Mr.Yuck	04/15/10 04:31 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/15/10 05:00 PM
Re: Bending push rods BB engine with hydraulic roller cam	Mr.Yuck	04/15/10 05:11 PM
Re: Bending push rods BB engine with hydraulic roller cam	Mr.Yuck	04/15/10 05:18 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/15/10 06:25 PM
Re: Bending push rods BB engine with hydraulic roller cam	Mr.Yuck	04/15/10 06:47 PM
Re: Bending push rods BB engine with hydraulic roller c	dirtybee	04/15/10 07:01 PM
Re: Bending push rods BB engine with hydraulic roller cam	ZIPPY	04/15/10 05:00 PM
Re: Bending push rods BB engine with hydraulic roller cam	HealthServices	04/15/10 07:16 PM
Re: Bending push rods BB engine with hydraulic roller cam	Supercuda	04/15/10 10:31 PM
Re: Bending push rods BB engine with hydraulic roller cam	Dodgem	04/15/10 10:54 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/16/10 09:51 PM
Re: Bending push rods BB engine with hydraulic roller cam	stumpy	04/16/10 09:53 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/16/10 10:10 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To