Bending push rods BB engine with hydraulic roller cam

Print Thread

Re: Bending push rods BB engine with hydraulic roller cam [Re: ChrisDavis] #668914 04/15/10 12:31 PM 04/15/10 12:31 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Why do you want to spin it so high? Does that cam pull that high into the 6's? Did you check your installed spring height? Are you using the springs that cam on the E-Heads? If so will they handle the pressure of a roller cam? [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Entire Thread
Subject	Posted By	Posted
Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/13/10 09:10 PM
Re: Bending push rods BB engine with hydraulic roller cam	rth	04/13/10 09:25 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/15/10 03:34 PM
Re: Bending push rods BB engine with hydraulic roller cam	moper	04/15/10 04:03 PM
Re: Bending push rods BB engine with hydraulic roller cam	Dodgem	04/15/10 04:04 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/15/10 04:20 PM
Re: Bending push rods BB engine with hydraulic roller cam	Mr.Yuck	04/15/10 04:31 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/15/10 05:00 PM
Re: Bending push rods BB engine with hydraulic roller cam	Mr.Yuck	04/15/10 05:11 PM
Re: Bending push rods BB engine with hydraulic roller cam	Mr.Yuck	04/15/10 05:18 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/15/10 06:25 PM
Re: Bending push rods BB engine with hydraulic roller cam	Mr.Yuck	04/15/10 06:47 PM
Re: Bending push rods BB engine with hydraulic roller c	dirtybee	04/15/10 07:01 PM
Re: Bending push rods BB engine with hydraulic roller cam	ZIPPY	04/15/10 05:00 PM
Re: Bending push rods BB engine with hydraulic roller cam	HealthServices	04/15/10 07:16 PM
Re: Bending push rods BB engine with hydraulic roller cam	Supercuda	04/15/10 10:31 PM
Re: Bending push rods BB engine with hydraulic roller cam	Dodgem	04/15/10 10:54 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/16/10 09:51 PM
Re: Bending push rods BB engine with hydraulic roller cam	stumpy	04/16/10 09:53 PM
Re: Bending push rods BB engine with hydraulic roller cam	ChrisDavis	04/16/10 10:10 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To