well the much awaited day has come and gone. Car is all back together but making noise from the passenger side badly. I switched from a mechanical cam to hydraulic and put new cam lifters and correct pushrods in. Adjusted the las according to the chart to a tee setting the preload on the lifters everything was completely coating in break in lube. Now after many times with the valve cover off then back on I started it with the cover off and held each rocker. Didnt seem to affect the noise to much but did a little. After shutting it off what i did notice is I am able to push down fairly easily on 3 off the lifters on the passenger side and none on the drivers. I am assuming these 3 are not pumping up and they are brand new. I have great oill pressure and everything is adjusted to specs. WHAT DO I DO NOW......