OOPS sorry Dave I just went to ebay and picked some mustang II items to show you what is out there,didn't notice they were chevy pattern. the rotors are available with either chevy (4 3/4") or mopar and ford(4 1/2") bolt patterns. or for about $100. extra you can go with heh BIG brake kit that uses intermediate GM or fairmount/granada rotors for the 4 1/2" pattern. basicly the difference is the caliper bracket is the extra $100. difference and you use gm calipes with the ford rotors to get the 11" brake setup.
you can do the frontend on the cheap or step up for things like big brakes,tubular A arms or stainless A arms, power or manual rack and pinion, stock or braided brake lines, there is all kinds of stuff available for these frontends.
but like I said above I think fatman is the only one that makes a crossmember for the mopars
the one that I did from him was fro 2X3 tubing for a willys that I did and it took about 45 minutes to have the whole thing set in place and tack welded, I measuers a second time and them welded it up, it couln't have been any easier
Ron...
P.S.If anyone want to talk to me about differt stuff on these streetrod just PM and I'll give you my phone #
if there is any way I can help you out just ask.....
here is a big brake kit
http://cgi.ebay.com/ebaymotors/MUSTANG-2...emZ110023596471big brake kit for $285.
http://cgi.ebay.com/ebaymotors/MUSTANG-I...0224509197&here is a big kit with dropped spindles, the shipping is the thing to watch and shop around for.
http://cgi.ebay.com/ebaymotors/MUSTANG-I...53235QQtcZphotocalipers and brakets
http://cgi.ebay.com/ebaymotors/MUSTANG-I...53993QQtcZphotorotors
http://cgi.ebay.com/ebaymotors/NEW-FORD-...16165QQtcZphotobetter rotors
http://cgi.ebay.com/ebaymotors/NEW-FORD-...28634QQtcZphotoanother kit
http://cgi.ebay.com/ebaymotors/MUSTANG-I...25607QQtcZphotoand more mustang II stuff here:
http://motors.shop.ebay.com/items/mustan...3286.m104.l1198