|
Re: E-body - Adding a rear sway bar?
[Re: JDMopar]
#590671
01/23/10 02:15 PM
01/23/10 02:15 PM
|
Joined: Jan 2003
Posts: 3,002 Long Island, NY
shakerjoe
master
|
master
Joined: Jan 2003
Posts: 3,002
Long Island, NY
|
Quote:
If you go with factory stock stuff, it should be a simple bolt in. The holes for the frame brackets are already drilled, or they have been on every E-body I have ever seen.I added a rear bar to my 71 Challenger,and it was a bolt in. I took all the stuff off of a 73 Cuda,cleaned it up and bolted it in. I used the original u bolts that were on my car, and they were plenty long enough. It handles better and I didn't notice any difference in the ride. It's an E-body.....how could you tell?
no holes pre drilled on my frame - doesn't even look like there are dimples - but with the undercoating it is hard to see, I have a factory sway bar setup that I was thinking of installing, even though it isn't correct for a V code...Joe
|
|
|
|
|
|