Yeah, the bracket under the dash has the 2 pivot points, 1 lower than the other. Basically shortened the Pedal the distance between those 2 pivot points . Cut & re-welded it so that the lower pivot & pushrod lined up, sectioned between the pushrod & the pivot.

The distance between the 2 pivots was about 3.25" & we took that out between the old pivot & pushrod hole. The pedal might just be about an Inch overall shorter than a correct manual pedal (comparing to a friends Manual brake Fury ) but I still got the 6:1 I was looking for.

Yes I had a really good welder do it!

If I can locate a manual pedal later I'll just swap it. harder than hens teeth to find since most of the Barges got power brakes.

Butch