KB Piston ring gap for 440 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer KB Piston ring gap for 440

Print Thread

Re: KB Piston ring gap for 440 [Re: CYACOP] #493569 10/11/09 08:01 AM 10/11/09 08:01 AM
Joined: Jan 2003 Posts: 25,200 Upper Midwest M MoparforLife Too Many Posts
MoparforLife Too Many Posts M Joined: Jan 2003 Posts: 25,200 Upper Midwest	FWIW I would much rather be on the too wide side than too tight on this one. End spec's with KB's for me is .0303 and I run mine at .0031/.0032. http://kb-silvolite.com/feature.php?action=read&F_id=40 Clean it, if it's Dirty. Oil it, if it Squeaks. But: Don't fix it, if it Works!

Entire Thread
Subject	Posted By	Posted
KB Piston ring gap for 440	CYACOP	10/11/09 02:21 AM
Re: KB Piston ring gap for 440	383man	10/11/09 02:31 AM
Re: KB Piston ring gap for 440	383man	10/11/09 02:34 AM
Re: KB Piston ring gap for 440	CYACOP	10/11/09 02:47 AM
Re: KB Piston ring gap for 440	RapidRobert	10/11/09 05:25 AM
Re: KB Piston ring gap for 440	CYACOP	10/11/09 10:28 AM
Re: KB Piston ring gap for 440	MoparforLife	10/11/09 12:01 PM
Re: KB Piston ring gap for 440	Rapid340	10/11/09 01:01 PM
Re: KB Piston ring gap for 440	moper	10/11/09 01:27 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1