Lets talk a little more about quench

Print Thread

Re: Lets talk a little more about quench [Re: coronet1966d] #483143 09/30/09 10:27 AM 09/30/09 10:27 AM
Joined: Nov 2008 Posts: 671 Wisconsin USA B Bill MeLater mopar
Bill MeLater mopar B Joined: Nov 2008 Posts: 671 Wisconsin USA	Correct, I checked it and found it to be within .0015 so I ran it. Tried the steel shims dry, w/copper coat, Hylomar. It probably would have been ok if I didn't abuse it so much but that's what I built it for

Entire Thread
Subject	Posted By	Posted
Lets talk a little more about quench	coronet1966d	09/29/09 04:04 AM
Re: Lets talk a little more about quench	RapidRobert	09/29/09 04:27 AM
Re: Lets talk a little more about quench	coronet1966d	09/29/09 04:34 AM
Re: Lets talk a little more about quench	RapidRobert	09/29/09 04:36 AM
Re: Lets talk a little more about quench	coronet1966d	09/29/09 04:37 AM
Re: Lets talk a little more about quench	moper	09/29/09 09:54 AM
Re: Lets talk a little more about quench	360view	09/29/09 11:31 AM
Re: Lets talk a little more about quench	patrick	09/29/09 11:49 AM
Re: Lets talk a little more about quench	360view	09/29/09 12:55 PM
Re: Lets talk a little more about quench	coronet1966d	09/29/09 04:27 PM
Re: Lets talk a little more about quench	classof65	09/29/09 10:14 PM
Re: Lets talk a little more about quench	moper	09/29/09 11:06 PM
Re: Lets talk a little more about quench	Supercuda	09/30/09 02:41 AM
Re: Lets talk a little more about quench	coronet1966d	09/30/09 03:17 AM
Re: Lets talk a little more about quench	360view	09/30/09 01:16 PM
Re: Lets talk a little more about quench	Supercuda	10/03/09 04:49 PM
Re: Lets talk a little more about quench	Intense RT Dan	10/03/09 05:07 PM
Re: Lets talk a little more about quench	RapidRobert	10/03/09 05:18 PM
Re: Lets talk a little more about quench	Intense RT Dan	10/03/09 05:34 PM
Re: Lets talk a little more about quench	Bill MeLater	09/30/09 02:05 PM
Re: Lets talk a little more about quench	coronet1966d	09/30/09 02:14 PM
Re: Lets talk a little more about quench	Bill MeLater	09/30/09 02:27 PM
Re: Lets talk a little more about quench	Bill MeLater	09/30/09 02:46 PM
Re: Lets talk a little more about quench	coronet1966d	09/30/09 02:58 PM
Re: Lets talk a little more about quench	Bill MeLater	09/30/09 03:08 PM
Re: Lets talk a little more about quench	coronet1966d	09/30/09 03:45 PM
Re: Lets talk a little more about quench	Bill MeLater	09/30/09 07:59 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To