Quote:

The problem I had was finding a blower motor with the hole in the correct spot.. Anyone reproing the correct blower motor??



Thats why I bought an NOS one off Ebay about seven years ago...

The other issue I had was all the afternarket heater cores have slightly shorter water supply tubes so ewhen you bolt the heater box up to the firewall the tubes only stick throught about .5" you could make it work but it's marginal at best... I looked for an NOS heater core with no lucky, considered having my original recored but instead I cut about 3" of the orignal tubes off an old core, swaged them open slightly so they would slide over standard 5/8 tubing than cut 1.5" off my new core, next I had the guy at the radiator shop solder the extensions onto my new core... Now about 1.25" extend out of the firewall...