727 torqueflite high psi relief

Print Thread

Re: 727 torqueflite high psi relief [Re: TrackPack] #3227184 04/15/24 12:40 PM 04/15/24 12:40 PM
Joined: Jan 2003 Posts: 25,910 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,910 Rio Linda, CA	Originally Posted by TrackPack Thanks for the reply! Any advice on drilling out the restictor? Looks like any drilling will have to be done at an angle? I drill it at the original angle with a 1/8" bit then, when the bit goes through to the channel, I walk the bit up vertical to remove the remaining partition. The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
727 torqueflite high psi relief	TrackPack	04/14/24 12:00 AM
Re: 727 torqueflite high psi relief	John_Kunkel	04/14/24 10:07 PM
Re: 727 torqueflite high psi relief	TrackPack	04/15/24 01:53 AM
Re: 727 torqueflite high psi relief	moparx	04/15/24 04:30 PM
Re: 727 torqueflite high psi relief	John_Kunkel	04/15/24 04:40 PM
Re: 727 torqueflite high psi relief	TrackPack	04/15/24 10:29 PM
Re: 727 torqueflite high psi relief	Cab_Burge	04/16/24 07:22 AM
Re: 727 torqueflite high psi relief	TrackPack	04/16/24 12:58 PM
Re: 727 torqueflite high psi relief	JohnRR	04/18/24 05:26 PM
Re: 727 torqueflite high psi relief	John_Kunkel	04/18/24 05:59 PM
Re: 727 torqueflite high psi relief	JohnRR	04/18/24 07:23 PM

Hop To