Originally Posted by 6PKRTSE
I have 7/16 D.T. X. 165 wall in my Hemi with Mopar (Edelbrock) heads with over .800 lift, street driven and strip with the RBRE rocker system with no issues shifting at 7600 thus far. The RBRE rocker system helps take out so much of the push rod angles and corrects most of the geometry.


Do they fit under somewhat stock appearing valve covers? To anyone with even minimal hemi knowledge my car will never be anything other than a fake, but to a typical 5.0 mustang owner I want them to believe it is a stock 426 with a '3/4 race' cam. I am going to be using iron exhaust manifolds, mechanical fuel pump, clutch fan, etc...

Note: I feel it is fair for me to call a 3/4 inch cam a '3/4 race' cam

I am not ready for a 1 inch cam, commonly referred to as 'full race'

Last edited by Craig J; 03/21/24 09:24 PM.