Pulled the spare Hemi block and heads and trans out of the car...attached the blower motor to my spare trans, and all set in the car. Switched from stamped timing cover to a cast one and I kept cutting the plate down until the motor sat level in the car......It needs an oiling system, a blower intake, and a blower, plus some incidentals....Car needs a lot.....Ready for Zoomies now!

DSC08578-1.jpgDSC08579.JPGDSC08580-1.jpg
Last edited by Dragula; 11/13/22 07:33 PM.
'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk