Originally Posted by NachoRT74
Originally Posted by John_Kunkel
A recent issue of Mopar Action covered this; IIRC the glass had to be broken out to access the interior.


yes the mirror baseplate get the holes for those screws BUT IF the screws are not stuck buy dust/rust, it could be done like shown with a modified screwdriver or:



[Linked Image]


I'd go with U code RR's approach if trying to take them apart as his tool would likely give much better leverage and control. When reassembling tape the areas off with 2 0r 3 layers of painters tape to prevent damage.

or as Stumpy suggested, tape off the mirror

I have also had luck with the acetone, Shallow pan with enough Acetone to submerge the mirror +1/2" or so. best if you can somehow cover it to contain the fumes and prevent the evaporation. Tin foil would work well.

last, call the supplier/ manufacturer. let us know what works for you beer

www.tandmautomotive-omaha.com