I start mine at 65 and when im where you are and im not sure the "book"way but I use my long arm clicker and right after the click I gently pull just a hair like I hit the mark and wanted a bolt snug. Im sure the bolt moves just a few degrees.

You might try that on your current #65 ever so slightly and see how much you add. I shoot for just above the min, spec and ive never go over. I generally can hit it the first or second bump. (not really a bump a gentle pull)

Here is a good read... it says add more tq. at the end of the article. It does not say in what manner. Im sure there is a tq value you could add but I just bang it out. But in the end all that really matters is you get the stretch needed.

https://www.cpgnation.com/how-to-measure-bolt-stretch-for-proper-torque/