Identify a K-Member - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Identify a K-Member

Print Thread

Re: Identify a K-Member [Re: cuda_tim] #2878905 01/23/21 02:03 PM 01/23/21 02:03 PM
Joined: Jan 2003 Posts: 1,908 Nebraska 4 4406bbl top fuel
4406bbl top fuel 4 Joined: Jan 2003 Posts: 1,908 Nebraska	Pay a frame shop to mount you car by the pinch welds and measure the points. One other thing you can do it jack the car up and use a plumb bob to plot the rear axle points, and then the front ball joint center and see what the wheelbase is side to side. A little tweek at the strut rod hole would be the worse, I have seen k-members off 1" at the wheel from that part getting tweeked.

Entire Thread
Subject	Posted By	Posted
Identify a K-Member	cuda_tim	12/26/20 10:14 PM
Re: Identify a K-Member	AndyF	12/27/20 12:12 AM
Re: Identify a K-Member	BDW	12/27/20 12:22 AM
Re: Identify a K-Member	cuda_tim	12/27/20 12:48 AM
Re: Identify a K-Member	rftroy	12/27/20 01:01 AM
Re: Identify a K-Member	cuda_tim	12/27/20 01:22 AM
Re: Identify a K-Member	Jim_Lusk	12/27/20 03:15 AM
Re: Identify a K-Member	cuda_tim	12/27/20 07:54 PM
Re: Identify a K-Member	Jim_Lusk	12/28/20 03:58 AM
Re: Identify a K-Member	racerlall	01/04/21 03:26 AM
Re: Identify a K-Member	cuda_tim	01/22/21 08:10 PM
Re: Identify a K-Member	4406bbl	01/23/21 06:03 PM
Re: Identify a K-Member	71GTX471	01/25/21 11:43 PM
Re: Identify a K-Member	cuda_tim	12/27/20 12:45 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1