Yes have everthing on you can then all you are really doing is hooking stuff up.You will have to consider how to raise and lower the body.A car lift is ideal but I never had one.I use to have a roll around gantry made out of wood but it finnaly rotted out.I have used a engine lift with a sling attached somewhere this time I used just the front part of my rotisserie.Leave the carb off gives you a liitle more room.If no lift is used I jack up the rear of the car and put jack stands under the axle housing then take off the pressure with a floor jack so I can swing the front a little if needed.Sounds like both of us responding to you have done this several times and can do it in our sleep but as always the first time is a bear.Just think it through before you start.