the pipe kit was just random bends with multiple bends per tube. I just cut what I need and formed the port end to fit the flange. That part was alot easier than I thought it would be. I'm using a band saw to cut the pipes and clean up the ends with my belt/disc combo sander. Some of the joints are really good, others are not quite so good. Overall I'm pretty happy with how it's workingout.

Dave- I don't have the collectors yet so that why I tacked 4 pieces of scrap together for a target. It ended up that i did not even use it. The flat bar located where I wanted the pipes to land and that worked well. The passenger side is mostly done except for the collector.