The "Dales Cuda Shop" mouldings fit like a glove, 1000% better then the original set i tried to make fit from Metro. There was no rebending/hammering with the rear ones to make them fit the contours as they should.

Still alot of little pieces to get finished yet... hoping to have it running in the next few days.

As for the questions above on the rear tail panel.... I sanded the coating off using 180 grit paper, switching to 320 once 70% of it was off. Once all of the coating was off i worked my way up using 320, 400, 600, 800, 1000, 1200, 1500, all wet paper. Then polished with autosol. The panel is just buffed by hand in those pics, but it could also then be machine buffed, and clear could be added at this point as well if desired.