Moparts
1970 Coronet.... 12 month resto starts June 2009!
Posted By: Edison62
1970 Coronet.... 12 month resto starts June 2009! - 04/05/09 01:02 PM
12 month resto starting June 2009!
Ok, It's of course a 1970 Coronet 440 model w/53,000 original miles on it. This one will be cloned into a Bee as close to what I would have ordered new! I'll update with pic's and info as we progress!
These first shots are the car sitting on the trailer in Western Canada just before heading east. Also a pic of the underhood, underside & trunk area.
Bryan
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee - 04/05/09 01:03 PM
Underhood shot.
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee - 04/05/09 01:09 PM
Another..
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee - 04/05/09 01:09 PM
Underside...very clean.
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee - 04/05/09 01:10 PM
Another shot.
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee - 04/05/09 01:52 PM
Trunk floor...yes it has one!!!
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee - 04/05/09 01:53 PM
Another trunk shot...
Posted By: Anonymous
Re: 1970 Coronet.... Wanna-Bee project. - 04/05/09 02:05 PM
Looks like a good starter platform I wish I had that luck. Keep the pics coming.
Posted By: jneuf
Re: 1970 Coronet.... Wanna-Bee project. - 04/05/09 03:48 PM
I have to ask because I just saw this car listed on the local classifieds....but isn't this the same car??
http://winnipeg.kijiji.ca/c-cars-vehicle...QAdIdZ118133138
Posted By: 4speeds4me
Re: 1970 Coronet.... Wanna-Bee project. - 04/05/09 04:48 PM
Looks like a decent place to start.
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/05/09 05:00 PM
Quote:
I have to ask because I just saw this car listed on the local classifieds....but isn't this the same car??
http://winnipeg.kijiji.ca/c-cars-vehicle...QAdIdZ118133138
Yes... same car.... was actually located in Saskatoon......soon on it's way to Nova Scotia!
Bryan
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/06/09 04:14 PM
Few more pic's before the fun begins... pretty clean floor. Will need a Rallye Dash frame and guages w/harness.
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/06/09 04:14 PM
Rear window area...
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/06/09 04:15 PM
Other side...
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/22/09 03:36 PM
Well, it's finally on the road east. Here's a few pic's of it loaded and departing Saskatoon! Should arrive in Nova Scotia by the weekend...then the fun begins....
Bryan
.JPG "5181251-P4200032(Medium).JPG")
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/22/09 03:38 PM
Another...
.JPG "5181254-P4200035(Medium).JPG")
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/22/09 03:39 PM
Heading out...
.JPG "5181256-HPIM1783(Medium).JPG")
Posted By: 69bronzeT5
Re: 1970 Coronet.... Wanna-Bee project. - 04/24/09 09:07 PM
Posted By: a12superbee
Re: 1970 Coronet.... Wanna-Bee project. - 04/25/09 08:46 AM
Sweet. Leave it white with the rubber baby buggy bumpers down the side I say.
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/25/09 11:36 AM
Quote:
Sweet. Leave it white with the rubber baby buggy bumpers down the side I say.
LOL...well Mark... it's a tight budget and I've always wanted an FC-7 car so I may just remove the side mouldings and change the color out to PURPLE w/steel wheels...then put the 318 drivetrain in for some fun cruzin...enjoy it for a while! The last one I had was apart for over 4 years!! Not going to make the same mistake w/this one...
As for the side mouldings... when they were added the chrome moulding (normally just behind the door on the quarter panel) must have been deleted? Any ideas?
Bryan
"rubber baby buggy bumpers" LMAO!!!!
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/29/09 11:52 PM
Well, it's finally arrived and I got a good day to check it out. It's a plain jane for sure. I haven't found the build sheet but the fender tag dosen't have much on it.....Here's a pic of it...
???
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/29/09 11:53 PM
Another pic...
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/29/09 11:54 PM
Underside...
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 04/29/09 11:55 PM
Solid.. grilles were removed for transport.
Posted By: 4speeds4me
Re: 1970 Coronet.... Wanna-Bee project. - 04/30/09 02:58 AM
Now the WORK starts!
Posted By: ChryCoGuy
Re: 1970 Coronet.... Wanna-Bee project. - 04/30/09 01:56 PM
Congrats Bryan! Looks like a good score! Hmmm... I'm likin' it as a sleeper Coronet 440 though...
Keep the colour and trim, but add a honkin' 440 and pistol grip 4-speed!
Of course an FC7 Bee clone will be nice too!
Posted By: RUNCHARGER
Re: 1970 Coronet.... Wanna-Bee project. - 04/30/09 06:48 PM
Looks great! Where are those guys that say Canadian cars are rustbuckets?
Sheldon
Posted By: DPelletier
Re: 1970 Coronet.... Wanna-Bee project. - 04/30/09 07:19 PM
Quote:
Looks great! Where are those guys that say Canadian cars are rustbuckets?
Sheldon
If'n I'd have seen that for sale, it may never have made it back east! 
Hey Sheldon, did you go to the Mopar show last Saturday? Goin to the one in Vernon this Sat?
Dave
Posted By: RUNCHARGER
Re: 1970 Coronet.... Wanna-Bee project. - 04/30/09 07:28 PM
Dave: You're only allowed one 70 Coronet! Whats going on in Vernon? I was at the little deal in Kelowna but the extremely loud 50's music and tight quarters for my car sent me packing after 15 minutes.
Sheldon
Posted By: DPelletier
Re: 1970 Coronet.... Wanna-Bee project. - 04/30/09 08:01 PM
Sounds like I didn't miss much then. Vic mentioned the club is doing something in Vernon; I believe it's at Vernon Dodge.
http://www.vernondodge.com/I'm not sure if I'll go or not; I really should work on the car so I can actually take it to a show one day!
ps. sorry everyone for the OT.
Dave
Posted By: magnumcharger
Re: 1970 Coronet.... Wanna-Bee project. - 04/30/09 11:39 PM
Quote:
Looks great! Where are those guys that say Canadian cars are rustbuckets?
Sheldon
Not on the Canadian Prairies they're not!!
Way to go Bryan. Now you need that special hood!!
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 05/01/09 12:37 AM
Quote:
Quote:
Looks great! Where are those guys that say Canadian cars are rustbuckets?
Sheldon
Not on the Canadian Prairies they're not!!
Way to go Bryan. Now you need that special hood!!
Thanks Robin, you know ONLY too well it's been a long wait for this one! When the budget is tight and the exchange (CDN to US$$) is sitting @ 25% + the cost of shipping..etc..etc...etc... I was VERY lucky to come across this one in Canada w/53,000 original miles!
So, yes I do need that "Special" buldge hood! Came across a few but shipping is always a pain! I have no problem w/leaving the flat one on it for now. I plan on doing this one is stages so I was thinking of getting it road worthy with the engine bay painted (FC-7) and looking as it should w/painted engine etc. The rest of the car will come along in time...
All I know is it's put a smile on my face...
Bryan
P.S... haven't got any BB 4 speed stuff you want to get rid of do you??
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 07/24/09 12:12 AM
Well, I've been collecting parts since the last month or so... have new/repo front and rear arm rest bases, front & rear seat covering (white), drivers side (remote) & passengers side mirror, 4 speed hump, under hood washer bottle, battery tie down & used 4 speed pedals, shifter box and mint white sunvisors......... but the best score came with the help of a fellow member here..... a BIG thanks
out to "magnumcharger"...
Robin found this "Buldge Hood" yesterday and knowing I was in need contacted me first thing today. The hood had been sitting inside for almost 20 years... and only 1/2 hour away!!!! I made arrangments to see it this evening and bought it. So, now one step closer!!!
So, I should have updated pic's of the Coronet soon....
Bryan
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 07/24/09 12:13 AM
2nd pic...
Posted By: Anonymous
Re: 1970 Coronet.... Wanna-Bee project. - 07/24/09 01:44 PM
Wow, that's a CLEAN car to start with! Don't see much rust at all!
Posted By: magnumcharger
Re: 1970 Coronet.... Wanna-Bee project. - 07/24/09 02:43 PM
Glad to help a friend Bryan!
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 07/24/09 05:57 PM
Quote:
Wow, that's a CLEAN car to start with! Don't see much rust at all!
It is clean... in fact we washed it up, probably the first wash in almost 20 years as the last sticker was 1993! Here's how she looked getting ready to go into the shop.....
Bryan
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 07/24/09 05:59 PM
Another.
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 07/24/09 06:00 PM
My father towing it....LOL!
Posted By: 69bronzeT5
Re: 1970 Coronet.... Wanna-Bee project. - 07/25/09 08:42 AM
Looking great so far Bryan! I get my Coronet home in October. I can't wait!
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 09/14/09 10:17 PM
Quote:
Few more pic's before the fun begins... pretty clean floor. Will need a Rallye Dash frame and guages w/harness.
Well, found the dash I need complete with A/C and harnesses....... most costly item yet(other than the car)... man this adds up fast!
Posted By: 340dart4spd
Re: 1970 Coronet.... Wanna-Bee project. - 09/21/09 12:44 AM
Quote:
Quote:
Few more pic's before the fun begins... pretty clean floor. Will need a Rallye Dash frame and guages w/harness.
Well, found the dash I need complete with A/C and harnesses....... most costly item yet(other than the car)... man this adds up fast!
Nice score...are you going the AC route ?
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 09/24/09 10:33 PM
Quote:
Quote:
Quote:
Few more pic's before the fun begins... pretty clean floor. Will need a Rallye Dash frame and guages w/harness.
Well, found the dash I need complete with A/C and harnesses....... most costly item yet(other than the car)... man this adds up fast!
Nice score...are you going the AC route ?
Yes... I wanted to keep the car an A/C car and the donor car (71 Chrysler 300) has the 440 w/all the Air stuff!
Posted By: 340dart4spd
Re: 1970 Coronet.... Wanna-Bee project. - 09/24/09 10:53 PM
Quote:
Quote:
Quote:
Quote:
Few more pic's before the fun begins... pretty clean floor. Will need a Rallye Dash frame and guages w/harness.
Well, found the dash I need complete with A/C and harnesses....... most costly item yet(other than the car)... man this adds up fast!
Nice score...are you going the AC route ?
Yes... I wanted to keep the car an A/C car and the donor car (71 Chrysler 300) has the 440 w/all the Air stuff!
is the white one AC... if not your gonna have to cut the firewall to use Air..
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 10/01/09 01:31 AM
Yup... factory A/C car!
Posted By: 340dart4spd
Re: 1970 Coronet.... Wanna-Bee project. - 10/01/09 10:04 PM
Quote:
Yup... factory A/C car!
cool your all set then,, I have a ton of 70 parts if u need anything
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 10/03/09 10:16 AM
Quote:
Quote:
Yup... factory A/C car!
cool your all set then,, I have a ton of 70 parts if u need anything
Want/need List:
:white door panel/arm rest/interior trim
:2X15" rallyes
:radiator for a big blk 4 speed car
:8 & 3/4 sure-grip
:big block bell & inspection cover
I'm heading to Maine the weekend of the 17th... doing a little pre-Xmas shopping.
Bryan
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 10/20/09 11:28 AM
Well, since the Coronet is in the body shop I've pulled the donor car in the main garage to pull the motor & tranmission...... here's the car!
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 10/20/09 11:30 AM
The motor...440 HP! HP + Torque =
Bryan
Posted By: magnumcharger
Re: 1970 Coronet.... Wanna-Bee project. - 10/20/09 05:34 PM
Bryan, don't forget...I need an 8.75 diff!!
Hinty hint-hint!
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 10/20/09 07:18 PM
Quote:
Bryan, don't forget...I need an 8.75 diff!!
Hinty hint-hint!
NO worries..... consider it done! I may need the center section but the rest is yours....... consider it payback for the hood find!!!
Bryan
Posted By: 340dart4spd
Re: 1970 Coronet.... Wanna-Bee project. - 10/20/09 07:51 PM
what year is the car bryan...
Posted By: Edison62
Re: 1970 Coronet.... Wanna-Bee project. - 10/21/09 12:51 AM
Quote:
what year is the car bryan...
The donor car is a 1971 Chrysler 300...... 440 TNT auto car loaded out. Originally Green w/white interior. I've had the car about 10 years..... it has points so I'll need a newer dist to put in my car.
Bryan
Posted By: 340dart4spd
Re: 1970 Coronet.... Wanna-Bee project. - 10/21/09 02:51 PM
Quote:
Quote:
what year is the car bryan...
The donor car is a 1971 Chrysler 300...... 440 TNT auto car loaded out. Originally Green w/white interior. I've had the car about 10 years..... it has points so I'll need a newer dist to put in my car.
Bryan
must be a late 71.. I see it has the later 72 Air cleaner....
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 10/29/09 10:07 PM
Ok, got a few.... first off just had to lay the Super Bee hood on it.... my resto man Jeffery took this shot before the disassembly began.
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 10/29/09 10:08 PM
Another....
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 10/29/09 10:09 PM
Ok, here we go....
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 10/29/09 10:10 PM
Another one...
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 10/29/09 10:11 PM
4 speed ....... someday!
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 10/29/09 10:12 PM
Top is removed!
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 10/29/09 10:13 PM
Last one for now....
Posted By: magnumcharger
Re: 1970 Coronet.... updated pic's Oct 29th! - 10/30/09 11:54 AM
Oh yeah! That Coronet is in NICE shape!!
I can't wait to see more updates Bryan!
Keep 'em coming!
Posted By: MLR426
Re: 1970 Coronet.... updated pic's Oct 29th! - 10/30/09 04:34 PM
Quote:
Last one for now....
It's time for you to get busy on it.
logan426
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 10/30/09 09:06 PM
Quote:
Quote:
Last one for now....
It's time for you to get busy on it.
logan426
Martin, you are correct but I have been busy.... buying parts,parts and more parts.
My resto guy was tied up and is just now able to give the car the time it needs. Still shooting for it to be on the road by the end of June/2010!
Bryan
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Dec 20th2009!! - 12/19/09 04:17 PM
A few update pic's...
Holes down both sides have been filled!
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 12/19/09 04:18 PM
Other side.
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 12/19/09 04:18 PM
Left rear quarter patch panel.
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 12/19/09 04:19 PM
Again...
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 12/19/09 04:20 PM
Inside...
Posted By: CoronetRTguy
Re: 1970 Coronet.... updated pic's Oct 29th! - 12/28/09 11:26 PM
Thats a nice looking car to start with and its going to be a great looking Bee when done.
Im working on a 70 Coronet R/T and love the 70 Coronets.
This is a car you love or hate and I love them.
What parts are you looking for I have a few things (or did) I will see what all I have.
I like that 300 that would be a great one to restore as well.
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 12/29/09 01:33 AM
Quote:
Thats a nice looking car to start with and its going to be a great looking Bee when done.
Im working on a 70 Coronet R/T and love the 70 Coronets.
This is a car you love or hate and I love them.
What parts are you looking for I have a few things (or did) I will see what all I have.
I like that 300 that would be a great one to restore as well.
Jay.... P.M.sent..........
Bryan
Posted By: Edison62
Re: 1970 Coronet.... updated pictures.. Dec 09! - 01/04/10 12:44 AM
Cleaned up the rockers w/wire wheel... nothing but original metal and some lead! Super solid!!!
Bryan
.jpg "5709377-Various022(Medium).jpg")
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 01/04/10 12:44 AM
Another shot...
.jpg "5709378-Various024(Medium).jpg")
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 01/04/10 12:45 AM
Last one for now...
.jpg "5709380-Various021(Medium).jpg")
Posted By: Anonymous
Re: 1970 Coronet.... updated pic's Oct 29th! - 01/04/10 03:41 AM
Your very lucky you did not have to deal with this, rotted from the inside out.
Posted By: Edison62
Re: 1970 Coronet.... updated pic's Oct 29th! - 01/04/10 06:15 PM
Quote:
Your very luck you did not have to deal with this, rotted from the inside out.
Robert, my hat is off to you!!! I don't have the heart or wallett for that kind of work.....
Bryan
Posted By: DodgeMaterial
Re: 1970 Coronet.... updated pictures.. Dec 09! - 01/11/10 05:21 AM
Looks like a great car and great work- keep it up! Dave
Posted By: Edison62
Updated pictures.. Jan 22nd 2010 Quarter panels..... - 01/23/10 01:14 AM
1st one...drivers side door and quarter done and primed.....
Bryan
Posted By: Edison62
Re: Updated pictures.. Jan 22nd 2010 Quarter panels... - 01/23/10 01:16 AM
Right side started.... smaller patch panel but also will replace the drop down also.....
Bryan
Posted By: Edison62
Re: Updated pictures.. Jan 22nd 2010 Quarter panels... - 01/23/10 01:17 AM
Next.....
Posted By: Edison62
Re: Updated pictures.. Jan 22nd 2010 Quarter panels... - 01/23/10 01:18 AM
Inside trunk shot....
Posted By: Edison62
Re: Updated pictures.. Jan 22nd 2010 Quarter panels... - 01/23/10 01:19 AM
Removed..... not bad at all for 40 years old.
Posted By: Edison62
Re: Updated pictures.. Jan 22nd 2010 Quarter panels... - 01/23/10 01:20 AM
Drop down in place.....
Posted By: Edison62
Re: Updated pictures.. Jan 22nd 2010 Quarter panels... - 01/23/10 01:21 AM
Inside shot w/replacement piece.
Posted By: Anonymous
Re: Updated pictures.. Jan 22nd 2010 Quarter panels... - 01/23/10 01:22 AM
Looking good.
Posted By: Edison62
Re: Updated pictures.. Jan 22nd 2010 Quarter panels... - 01/23/10 02:55 AM
Thanks Robert..... my nephew (Jeffery) is doing the body work/paint.... under 30 years old and does amazing work. He did a complete resto on his father's 1969 #'s matching Road Runner.... here's a link for you to check it out..
P.S. The yellow Duster is Jeffery's first car and I'm sure he'll have it forever!!!!
http://s263.photobucket.com/albums/ii158/Edison1962/1969%20Road%20Runner/Bryan
Posted By: Anonymous
Re: Updated pictures.. Jan 22nd 2010 Quarter panels... - 01/23/10 05:51 AM
It certainly does look nice and so will yours when he gets through with it.
Posted By: ChryCoGuy
Re: Updated pictures.. Jan 22nd 2010 Quarter panels... - 01/28/10 04:01 PM
Bryan, the car's looking good! I'd say Jeffery does good work!
Keep the updates comin'!
Posted By: Edison62
Re: Updated pictures.. March 4th Quarter panels... - 03/04/10 08:06 PM
Ok, got a few more pictures to share.....
Right side quarter...
.JPG "5845199-IMG_4493(1).JPG")
Posted By: Edison62
Re: Updated pictures.. March 4th Quarter panels... - 03/04/10 08:06 PM
Right door...
Posted By: Edison62
Re: Updated pictures.. March 4th Quarter panels... - 03/04/10 08:07 PM
Rear window area & roof....
Posted By: Edison62
Re: Updated pictures.. March 4th Quarter panels... - 03/04/10 08:08 PM
Body in primer....
Posted By: Edison62
Re: Updated pictures.. March 4th Quarter panels... - 03/04/10 08:08 PM
Right inner fender...
Posted By: Edison62
Re: Updated pictures.. March 4th Quarter panels... - 03/04/10 08:09 PM
Left inner fender....
Posted By: Anonymous
Re: Updated pictures.. March 4th Quarter panels... - 03/05/10 01:20 AM
Posted By: Edison62
Re: Updated pictures.. March 21st.... UPDATES! - 03/21/10 02:43 AM
A few more update pictures.... right fender.
Posted By: Edison62
Re: Updated pictures.. March 21st.... UPDATES! - 03/21/10 02:44 AM
Left fender....
Posted By: Edison62
Re: Updated pictures.. March 21st.... UPDATES! - 03/21/10 02:44 AM
Factory dash removed....
.JPG "5877914-IMG_4516(2).JPG")
Posted By: Edison62
Re: Updated pictures.. March 21st.... UPDATES! - 03/21/10 02:45 AM
Doors, windshield, "K" frame... removed!
Posted By: Edison62
Re: Updated pictures.. March 21st.... UPDATES! - 03/21/10 02:46 AM
Another shot....
Posted By: magnumcharger
Re: Updated pictures.. March 21st.... UPDATES! - 03/21/10 12:27 PM
What next? Sandblasting?
Posted By: Edison62
Re: Updated pictures.. March 21st.... UPDATES! - 03/22/10 02:14 AM
Hey Robin, next is cleaning up around the windshield area.... firewall... and getting the hood stripped.
Bryan
Posted By: ChryCoGuy
Re: Updated pictures.. March 21st.... UPDATES! - 03/23/10 02:35 PM
You're getting there Bryan! Man, is it ever looking good!
Do you plan to have it on the road this summer?
Posted By: Edison62
Re: Updated pictures.. March 21st.... UPDATES! - 03/24/10 10:20 AM
Hey Mark, thanks for the kind words. The plan is to have it ready to go for the MOPAR show @ Scotia Chrysler in Sydney in Sept......still alot to do... going to start on the drivetrain the beginning of April! I have a 71 HP 440 (TNT) from a Chrysler 300 that will be going in it (disguised as a 383)!!!!
Bryan
Posted By: Edison62
Re: Updated pictures.. March 21st.... UPDATES! - 05/10/10 11:01 AM
Not much to update, but did drop of a few parts to aid in the resto!!!
Posted By: Edison62
Re: Updated pictures.. May 20th..... UPDATES! - 05/20/10 10:11 PM
Got a few updated shots.... cleaned up under the hood area, primed and close to ready for paint!
Pic #1
Posted By: Edison62
Re: Updated pictures.. May 20th..... UPDATES! - 05/20/10 10:12 PM
Pic #2
Posted By: Edison62
Re: Updated pictures.. May 20th..... UPDATES! - 05/20/10 10:13 PM
Still smoothing out the quarters....
Posted By: Edison62
Re: Updated pictures.. May 20th..... UPDATES! - 05/20/10 10:13 PM
Other side.
Posted By: RUNCHARGER
Re: Updated pictures.. May 20th..... UPDATES! - 05/21/10 03:43 AM
Looks good. Glad it's not me blocking those quarters, they're probably one of the hardest quarters to do with all the weird curves and several body lines.
Sheldon
Posted By: Edison62
Re: Updated pictures.. May 20th..... UPDATES! - 05/21/10 03:55 AM
Quote:
Looks good. Glad it's not me blocking those quarters, they're probably one of the hardest quarters to do with all the weird curves and several body lines.
Sheldon
Forsure Sheldon..... they were in great shape to begin with but had that "baby bumper moulding" down the center, so Jeffery is just taking the extra time to make sure everything is smooth and in line..!!!!!
Bryan
Posted By: Edison62
Re: Updated pictures.. May 22nd..... UPDATES! - 05/22/10 10:03 PM
Well, after many, many months in the garage she's out for a breath of fresh air.....
Bryan
Posted By: Edison62
Re: Updated pictures.. May 22nd.... UPDATES! - 05/22/10 10:04 PM
Pic two....
Posted By: Edison62
Re: Updated pictures.. May 22nd..... UPDATES! - 05/22/10 10:04 PM
Pic 3.
Posted By: Edison62
Re: Updated pictures.. May 22nd..... UPDATES! - 05/22/10 10:05 PM
Last one for now..........
Posted By: Silver70
Re: Updated pictures.. May 22nd..... UPDATES! - 05/23/10 01:17 AM
Looks like you better pick up the pace... 12 months is almost up
Looking good
Posted By: Edison62
Re: Updated pictures.. May 22nd..... UPDATES! - 05/23/10 02:13 AM
Quote:
Looks like you better pick up the pace... 12 months is almost up Looking good
Hey Joe, you are correct.... I'm running behind. I started the thread in April of 2009 hoping to have the car in the shop by June! We didn't end up getting it in until sometime in late Sept/early Oct if I remember correctly so we're not doing bad! The engine is out of the donor car and waiting to be gone through (see pic).
Bryan
Posted By: Anonymous
Re: Updated pictures.. May 22nd..... UPDATES! - 05/23/10 05:58 AM
Where is all the snow, don't you guys still have snow this time of year.
Posted By: Edison62
Re: Updated pictures.. May 22nd..... UPDATES! - 05/23/10 03:35 PM
Quote:
Where is all the snow, don't you guys still have snow this time of year.
LOL... there was frost on the roof of the garage yesterday!!!!!!!!! does that count???
Bryan
Posted By: Silver70
Re: Updated pictures.. May 22nd..... UPDATES! - 05/27/10 04:39 AM
Just playing, it's alot of work, been working on my challenger again and it seems like all I do is weld! Definetly gotta pace yourself or it's easy to get burnt out.
Posted By: Edison62
Re: Updated pictures.. May 22nd..... UPDATES! - 05/27/10 10:21 AM
Quote:
Just playing, it's alot of work, been working on my challenger again and it seems like all I do is weld! Definetly gotta pace yourself or it's easy to get burnt out.
Hey Joe, I hear ya. I'd like to say I'm getting burnt out but it's more my wallet. Now, if you were to speak w/Jeffery (my nephew doing the body) you might get another story!!! LOL!!! Everyone involved will be happy to see it done, of that... I'm sure!
Bryan
Posted By: Edison62
Re: Updated pictures.. July 4th..... UPDATES! - 07/05/10 12:09 AM
Ok, got some updates..... been busy with the engine side of things mostly. So, the 4 speed hump has been welded in place and a coat of undercoating sprayed over the floor. Also had one small hole just below the bright switch.. also fixed!
Posted By: Edison62
Re: Updated pictures.. July 4th..... UPDATES! - 07/05/10 12:10 AM
Floor shot.
Posted By: Edison62
Re: Updated pictures.. July 4th..... UPDATES! - 07/05/10 12:11 AM
Underside.......
Posted By: ChryCoGuy
Re: Updated pictures.. July 4th..... UPDATES! - 07/05/10 03:57 PM
Quote:
Underside.......
Looking good, Bryan!
Just a question... would the factory have seam-sealed that from the bottom side?
Posted By: Edison62
Re: Updated pictures.. July 4th..... UPDATES! - 07/05/10 09:01 PM
Quote:
Quote:
Underside.......
Looking good, Bryan!
Just a question... would the factory have seam-sealed that from the bottom side?
Not sure, I'll be checking out a factory stick car to see exactly how it should look... then go from there. Theres still approx 1 inch of metal overhang on the underside that probably should be trimmed.
Bryan
Posted By: ChryCoGuy
Re: Updated pictures.. July 4th..... UPDATES! - 07/06/10 12:17 PM
Quote:
Quote:
Quote:
Underside.......
Looking good, Bryan!
Just a question... would the factory have seam-sealed that from the bottom side?
Not sure, I'll be checking out a factory stick car to see exactly how it should look... then go from there. Theres still approx 1 inch of metal overhang on the underside that probably should be trimmed.
Bryan
Got it!
Might not be a bad idea to seal it anyway, to keep moisture from wicking through to the carpet if you happen to drive it in the rain.
Man, that car is gonna be awesome when you finish it!
Posted By: Edison62
Re: Updated pictures.. July 4th..... UPDATES! - 07/08/10 11:39 AM
Man, that car is gonna be awesome when you finish it!
Thanks Mark, the engine is at a local shop in Truro to get checked out etc..etc.. almost everything has been bought now... still looking for a few hard to find items. Hoping to finish it around the one year time frame... didn't start it until around the end of Sept/early Oct of 2009!
Bryan
Posted By: Edison62
Re: Updated pictures.. July 20th..... UPDATES! - 07/20/10 08:17 PM
Just picked this up...
Bumpers are re-chromed and ready to pick up, should get them on Thursday (pic's to follow), engine has been bored out 30 over, crank polished and balanced, new pistons & rings ..... heads are getting a refresh w/hardened seats. Still need a big block bell housing and carb...
Bryan
Posted By: Edison62
Re: Updated pictures.. Aug 3rd..... UPDATES! - 08/03/10 02:11 PM
Well, we have paint!!!!!! Got the steel rims painted up in FC-7 over the past weekend. Will mount the tires this week!
Posted By: Edison62
Re: Updated pictures.. Aug 3rd..... UPDATES! - 08/03/10 02:12 PM
Backside.
Posted By: Edison62
Re: Updated pictures.. Aug 20... UPDATES! - 08/21/10 03:40 AM
Some fun pictures......
More purple soon...
Rear end is done as is the 440........
Bryan
Posted By: Anonymous
Re: Updated pictures.. Aug 20... UPDATES! - 08/21/10 04:24 AM
I was wondering what happened to you....thought maybe you got snowed in already and couldn't get to the car.
Looks awesome
Posted By: Edison62
Re: Updated pictures.. Aug 20... UPDATES! - 08/25/10 02:46 AM
Hey Rob, it's been crazy......
Just finished building the 440 and rear diff... still collecting parts for the 4 speed.... sold our home end of June...moving on the 25th of Aug.... bought a bike ..... just got the FC-7 mixed (locals are switching to water base)....just had enough to mix.... it's just been a very busy time.
Bryan
Posted By: Anonymous
Re: Updated pictures.. Aug 20... UPDATES! - 08/26/10 04:36 AM
Good luck with the move, hope all goes well. Nice bike!
Posted By: Edison62
Re: Updated pictures.. October 10th..... UPDATES! - 10/12/10 01:42 PM
Quote:
Quote:
Looks like you better pick up the pace... 12 months is almost up Looking good
Hey Joe, you are correct.... I'm running behind. I started the thread in April of 2009 hoping to have the car in the shop by June! We didn't end up getting it in until sometime in late Sept/early Oct if I remember correctly so we're not doing bad! The engine is out of the donor car and waiting to be gone through (see pic).
Bryan
Well, here it is mid October and the engine ($$$$$) is done... correct exhaust manifolds are still off to be painted... carb (750 Eddy) is on it's way... dist/wires etc are just waiting.
A BIG thanks out to Darrell.....
From this.....
To this.....
New grommets/pcv to be installed....
Used the new bracket for the electronic ignition conversion. Will paint both the bracket & box engine color to hide it better.
Bryan
Posted By: Edison62
Re: Updated pictures.. October 23rd..... UPDATES! - 10/24/10 02:01 AM
Ok... well here's some pictures of the car, blocked out over & over.. also added the bracket for the 4 speed "Z" bar.
Bracket for the "Z" bar......
We are moving along.....
Bryan
Posted By: Edison62
Re: Updated pictures.. October 23rd..... UPDATES! - 10/24/10 02:08 AM
Posted By: RV2
Re: Updated pictures.. October 23rd..... UPDATES! - 10/24/10 02:25 AM
It's awesome!!!
Posted By: moopa
Re: Updated pictures.. October 23rd..... UPDATES! - 10/24/10 03:19 AM
Unreal! Looks deadly!
Mark
Posted By: BEEQUIK
Re: Updated pictures.. October 23rd..... UPDATES! - 10/24/10 03:30 AM
looks great gotta love a purple 70 bee. here is one I was a foster host for a while back...
Posted By: Edison62
Re: Updated pictures.. October 23rd..... UPDATES! - 10/24/10 10:36 PM
Thanks for the words....... really looking forward to getting my foot into it!!!!!!!!!
Bryan
Posted By: RUNCHARGER
Re: Updated pictures.. October 23rd..... UPDATES! - 10/24/10 11:39 PM
I bet it flys back together now. It's just a long drawn out grind to get it into paint. Everything after is fun, every piece you hang on it will make it look so much better. BTW that paint really looks shiny and straight.
Sheldon
Posted By: Edison62
Re: Updated pictures.. October 23rd..... UPDATES! - 10/25/10 12:50 AM
Quote:
BTW that paint really looks shiny and straight.
Sheldon
Thanks Sheldon, going to work on the dash now. It's from a 70 Charger R/T... giving it a complete resto. The paint is sweet but is only a rough coat for now to see how everything looked... nice and straight.
Bryan
Posted By: jrwoodjoe
Re: Updated pictures.. October 23rd..... UPDATES! - 10/25/10 02:02 AM
Man that looks sweeeeet! Call me CRAZY but I can smell the PLUM from here.
I agree, judging by the lines in the reflection on the quarters, it looks like all that blocking has paid off.
Joe
Posted By: ChryCoGuy
Re: Updated pictures.. October 23rd..... UPDATES! - 10/25/10 05:05 PM
Quote:
We have more PURPLE.....................
I love this color......!!!!!!!!!!!!!!!!!
Bryan 
Lookin' GREAT, Bryan!
Posted By: JDMopar
Re: Updated pictures.. October 23rd..... UPDATES! - 10/26/10 01:55 AM
DON'T touch it!!
It looks like it's still
WET !
Posted By: Edison62
Re: Updated pictures.. October 23rd..... UPDATES! - 10/30/10 03:51 AM
Thanks again guys.... I can't say enough how happy I am with the progress! Believe it or not, this car will be a daily driver in good weather and I can't wait to get out on the highway with it........ family aboard!!!
Posted By: 68KillerBee
Re: Updated pictures.. October 23rd..... UPDATES! - 10/30/10 07:19 AM
wow, glad i clicked back on this. that thing looks awesome!!! and a
. What color interior and a stripe in the future?? neat to follow along these threads
Posted By: Edison62
Re: Updated pictures.. October 23rd..... UPDATES! - 10/31/10 03:57 PM
Quote:
wow, glad i clicked back on this. that thing looks awesome!!! and a . What color interior and a stripe in the future?? neat to follow along these threads
When the dust settles we'll have a Plum Crazy 70 Super Bee clone/tribute something. White vinyl roof with matching white bench seat interior. White reverse "C" stripe also. Two sets of wheels, one body color w/blackwalls & dog dish hubcaps and the second factory 15" rallyes with white letter tires.........
Bryan
Posted By: Edison62
Re: Updated pictures.. October 23rd..... UPDATES! - 10/31/10 03:59 PM
Quote:
Quote:
We have more PURPLE.....................
I love this color......!!!!!!!!!!!!!!!!!
Bryan
Lookin' GREAT, Bryan!
Thanks Mark... did you know this 4 door is low miles and for sale in Maine....
Bryan
Posted By: Anonymous
Re: Updated pictures.. October 23rd..... UPDATES! - 10/31/10 04:49 PM
Posted By: ChryCoGuy
Re: Updated pictures.. October 23rd..... UPDATES! - 11/01/10 03:35 PM
Quote:
Thanks Mark... did you know this 4 door is low miles and for sale in Maine....
Bryan
Hmmmm.... tempting. Gotta get the bank account back in shape first, though. Have you looked at the car in person? Is it rusty at all? 
Posted By: JAAK
Re: Updated pictures.. October 23rd..... UPDATES! - 11/01/10 09:16 PM
Looks great!!!!! I just painted my charger a couple of weeks ago, too, so I know just how thrilled you are! Just wondering what kind of paint did you use?
Jason
Posted By: jeff_past
Re: Updated pictures.. October 23rd..... UPDATES! - 11/02/10 02:54 PM
This paint is actually just a single stage Nason urethane. I put 1 wet coat on just to get some paint on the roof and around the windows before the vinyl roof goes on, so i figured a coat on the quarters would give me an idea of how straight everything would be so i sprayed them as well.
The final paint will be dupont's chromabase base/clear line. I bought more then enough of it before they switched over to the waterborne line here locally.
Posted By: Edison62
Re: Updated pictures.. October 23rd..... UPDATES! - 11/02/10 03:03 PM
Quote:
Bryan
the car is looking absolutely fantastic, you're just about at the patting yourself on the back stage, well done my good man.
Thanks Robert.... it's coming along great. Jeff (see note above) is the one who gets the pat on the back... I'm only writing the checks!!!lol!! 0-ya and offering my 
of wisdom!
Bryan
Posted By: moparpollack
Re: Updated pictures.. October 23rd..... UPDATES! - 11/02/10 04:33 PM
Just a question why didn't you paint the engine compartment and front door jams?
Posted By: jeff_past
Re: Updated pictures.. October 23rd..... UPDATES! - 11/02/10 04:53 PM
As this was just a 'preliminary coat' if you will, to coat the roof before vinyl, and to check the quarters as i still doubt my work sometimes lol. There was no need to paint anything but. Under the hood and the front of the jambs will be painted only once when the car gets its final paint as there are no worries about those areas. Hope that makes some kind of sense
Posted By: JAAK
Re: Updated pictures.. October 23rd..... UPDATES! - 11/02/10 09:02 PM
Quote:
As this was just a 'preliminary coat' if you will, to coat the roof before vinyl, and to check the quarters as i still doubt my work sometimes lol. There was no need to paint anything but. Under the hood and the front of the jambs will be painted only once when the car gets its final paint as there are no worries about those areas. Hope that makes some kind of sense
Nothing wrong with that, just another step to perfection. You're not the only one I've seen do that, there was a Charger (I think on DC.com), After completing his bodywork he painted his car with SS urethane black (because black shows everything). He was satisfied with it so he scuffed it an re-shot it the color he had pick...(I think it was EV2).
Jason
Posted By: DPelletier
Re: Updated pictures.. October 23rd..... UPDATES! - 11/03/10 12:43 AM
Looking good, Bryan!
Dave
Posted By: Edison62
Re: Updated pictures.. October 23rd..... UPDATES! - 11/03/10 03:35 AM
Quote:
Looking good, Bryan!
Dave
Thanks Dave.... seeing what you've done with your car that means alot!
I have a few things I need help with.. not sure if you have the info. Need exact placement for the 383 emblems on the fenders as well as the fender turn signals. Also, need my rear finish panel restored/refinished..... any ideas?
Bryan
Posted By: DPelletier
Re: Updated pictures.. October 23rd..... UPDATES! - 11/03/10 09:46 PM
Hey Bryan,
Thanks for the kind words. I think you are probably going to beat me to the finish based on your stellar progress so far!
I did read your post in Q&A, but my car has neither the 383 emblems or the fender mounted turn signals so I couldn't be much help.
There are a few guys who do a good job restoring the anodized rear panel, but I opted to buy the best one I could find on ebay instead; my panel isn't perfect, but it looks pretty good.
Good luck and I'm looking forward to seeing your progress pics. If you ever find yourself out my way
and we'll
Dave
Posted By: Edison62
Re: Updated pictures.. October 23rd..... UPDATES! - 11/08/10 12:52 AM
Quote:
If you ever find yourself out my way and we'll
Dave
Ditto......
Bryan
Posted By: 340dart4spd
Re: Updated pictures.. October 23rd..... UPDATES! - 01/26/11 02:35 AM
any new Pic's of your BEE CLONE? Please share some..
Posted By: RUNCHARGER
Re: Updated pictures.. October 23rd..... UPDATES! - 01/26/11 02:39 AM
I just read on another thread that he messed himself up for a few months. We may have to get a Moparts commitee together to put his car together for him (after we finish DPelletier's S-Bee!).
Sheldon
Posted By: DPelletier
Re: Updated pictures.. October 23rd..... UPDATES! - 01/26/11 08:41 PM
Quote:
I just read on another thread that he messed himself up for a few months. We may have to get a Moparts commitee together to put his car together for him (after we finish DPelletier's S-Bee!).
Sheldon
I missed that thread; hope it's nothing serious. 
.....and thanks for the help so far! May have to bug you for your expertise once or twice more, but my car will be on the road this spring one way or the other! 
Dave
Posted By: Edison62
Re: Updated pictures..Feb...19th ... 2011 - 02/19/11 06:01 AM
Yup... it sucks... on hold... but still shooting for a June finish time frame.
Hopefully it will go together easier than most as 95% of the parts are NEW/REPO.... no half ass issues here.
Bryan
Posted By: Edison62
Re: Updated pictures..Feb...19th ... 2011 - 02/19/11 06:07 AM
Staples and busted leg....
Posted By: Edison62
Re: Updated pictures..Feb...19th ... 2011 *DELETED* - 02/19/11 06:09 AM
New Cast....
Posted By: Anonymous
Re: Updated pictures..Feb...19th ... 2011 - 02/19/11 07:13 AM
And here I thought you would have gone with purple on that cast.
Looks like you have to re-potty train again since you can't bend a leg, bin there dun that by gar.
Posted By: Edison62
Re: Updated pictures..March 18th 2011 - 03/19/11 03:44 AM
Hey Robert... I did try for the Purple cast but they only had the green & pink!
So, got these pic's from Jeffery today. He's spent sooooooooo many hours block sanding & lining up panels! As mentioned, we are hoping to have the body completely painted by the end of April which will leave us May & June for re-assembly with an end June deadline (self imposed)!
Bryan
Well, all the parts are bolted on!
Got everything lined up!
Finishing off the hood scoops.... holes are in for the fender turn signals.
Sides are super straight after many hours of blocking.
Posted By: Anonymous
Re: Updated pictures..March 18th 2011 - 03/19/11 05:24 AM
It is going to look very nice when shot with color.
Hope the leg is feeling better.
Posted By: N9671X2
Re: Updated pictures..March 18th 2011 - 03/20/11 02:11 PM
Here is some more motivation for you
Posted By: Edison62
Re: Updated pictures..March 18th 2011 - 03/21/11 12:59 PM
Quote:
Here is some more motivation for you
OOOOOOOOOOOOOOOO Paul... you soooooo need to send me more pic's of that car!!!! either a link or pictures to bigblkmopar@yahoo.ca would be appreciated. I also noticed it has rocker moldings... I've seen less than 1/2 dozen Super Bee's with that option! My car has them and I'm keeping them on it as a Super Bee....
Bryan
Posted By: magnumcharger
Re: Updated pictures..March 18th 2011 - 03/21/11 02:38 PM
I can't wait to see this car "in person" Bryan!
I envision a photo shoot...with both of our purple beasts...and the Halifax skyline in the background!
Posted By: N9671X2
Re: Updated pictures..March 18th 2011 - 03/21/11 10:48 PM
Paint and body were done by board member FY1TA
Great experience
Posted By: N9671X2
Re: Updated pictures..March 18th 2011 - 03/21/11 10:48 PM
Posted By: N9671X2
Re: Updated pictures..March 18th 2011 - 03/21/11 10:49 PM
Posted By: N9671X2
Re: Updated pictures..March 18th 2011 - 03/21/11 10:50 PM
Posted By: N9671X2
Re: Updated pictures..March 18th 2011 - 03/21/11 10:55 PM
I didn't mean to hijack this post, maybe I shouldn't have posted these here, but Bryan asked to see some more pictures of the car.
Posted By: The70RTChallenge
Re: Updated pictures..March 18th 2011 - 03/21/11 10:55 PM
Quote:
Paint and body were done by board member FY1TA Great experience
THATS A BEAUTIFUL CAR!!! Definetly something good to motivate us all..
Posted By: MuuMuu101
Re: Updated pictures..March 18th 2011 - 03/21/11 11:26 PM
Quote:
Quote:
Paint and body were done by board member FY1TA Great experience
THATS A BEAUTIFUL CAR!!! Definetly something good to motivate us all..
That car looks amazing. VERY VERY VERY COOL!!!
Posted By: Edison62
Re: Updated pictures..March 18th 2011 - 03/21/11 11:27 PM
Quote:
Quote:
Paint and body were done by board member FY1TA Great experience
THATS A BEAUTIFUL CAR!!! Definetly something good to motivate us all..
Thanks Paul, appreciate you posting them so soon!
Bryan
Posted By: 71 Charger R/T
Re: Updated pictures..March 18th 2011 - 03/22/11 03:53 PM
WOW Bryan! That is STUNNING! You've gotta be pumped! That looks beautiful, Can't wait to see/follow your continued progress. Keep the pictures coming! My nephew has a '70 FC7 Bee that is in decent driver shape but I will show him your post and spur him on to restoring it so it can be as DROP DEAD GORGEOUS as yours.
(that's two thumbs up!)
Posted By: gtx6970
Re: Updated pictures..March 18th 2011 - 03/22/11 04:05 PM
Quote:
I didn't mean to hijack this post, maybe I shouldn't have posted these here, but Bryan asked to see some more pictures of the car.
Paul, is this car done yet? I seen it at Garys's place a couple years ago and it looked very nice.
Posted By: Edison62
Re: Updated pictures..March 18th 2011 - 03/23/11 09:05 PM
Quote:
WOW Bryan! That is STUNNING! You've gotta be pumped! That looks beautiful, Can't wait to see/follow your continued progress. Keep the pictures coming! My nephew has a '70 FC7 Bee that is in decent driver shape but I will show him your post and spur him on to restoring it so it can be as DROP DEAD GORGEOUS as yours. (that's two thumbs up!)
Thanks for the kind words Lyndon... the painted car isn't mine... not sure if you knew that. It's Pauls car and he posted those pic's at my request. Although mine should be painted by the end of next month!!!!!! And I can't wait!!!!
Bryan
Posted By: 71 Charger R/T
Re: Updated pictures..March 18th 2011 - 03/23/11 10:45 PM
OOPS! Sorry Bryan, My mistake! I should have noticed the difference..... Ram Charger hood V.S. Gorilla nose hood and read a little deeper. (I tend to just look at the pictures too much) I like the Gorilla nose better for looks personally. Still, I can't wait to see your progress. I guess I was stupid.... and that's not smart. Ha ha.
Posted By: N9671X2
Re: Updated pictures..March 18th 2011 - 03/24/11 04:29 PM
Quote:
Quote:
I didn't mean to hijack this post, maybe I shouldn't have posted these here, but Bryan asked to see some more pictures of the car.
Paul, is this car done yet? I seen it at Garys's place a couple years ago and it looked very nice.
Close, but its been close for 2 years Drivetrain/suspension is ready to go in from underneath. Basically every component is done or purchased except for seat backs. Never wanted this to turn into work, so it has been on the back burner while spending time working, family and fishing
Posted By: Edison62
Re: Updated pictures..March 18th 2011 - 03/25/11 04:02 AM
Quote:
Quote:
Quote:
I didn't mean to hijack this post, maybe I shouldn't have posted these here, but Bryan asked to see some more pictures of the car.
Paul, is this car done yet? I seen it at Garys's place a couple years ago and it looked very nice.
Close, but its been close for 2 years Drivetrain/suspension is ready to go in from underneath. Basically every component is done or purchased except for seat backs. Never wanted this to turn into work, so it has been on the back burner while spending time working, family and fishing
Paul, you hit the nail on the head. It shouldn't turn into work!!!!!!!!!!!!!!!!!!!!!!!!!!
When I had my original paint 73 Dart Sport /6 car I thought..hmmm.. maybe drop in a nice small block & 4 speed and drive the he77 out of it. Well, then I decided to get my dream car.... just didn't think it would cost this much!LOL!
Don't get me wrong, it's my choice and It couldn't have been done/finished the way I wanted if not for one young man.. my nephew.. Jeffery! He's known how long I've wanted this exact car. But, you do begin to question the amount of $$$ at some point.... So... when mine is done in June..... with around 30G's or more into it.... I'm going to drive the F%C%I@ wheels off it... then replace them and do it all over again!!! I don't care about the price of gas... the stone chips... rain... or how many miles I'm putting on it..... time to ride with my lady by my side and the lad in the back seat (playing Nintendo DS)...lol!!!!!!
Bryan
P.S. I pulled into a garage one time w/my 70 Charger R/T and a guy asked me..... man, this is such a nice car... why do you drive it the way you do??? I answered... because that's what it was built for!
Posted By: magnumcharger
Re: Updated pictures..March 18th 2011 - 03/25/11 04:07 AM
Wow!
There's a blast from the past!
Posted By: Edison62
Re: Updated pictures..March 18th 2011 - 03/25/11 05:08 AM
Quote:
Wow!
There's a blast from the past!
LOL... I fully agree Robin... the Charger was a scary car.. my foot was always in the oil pan! This is the ONLY other picture I have of it....
I believe this was how we met... my Mopars sitting behind my house.... caught your eye! LOL!
Bryan
Posted By: jpilone
Re: Updated pictures..March 18th 2011 - 04/18/11 11:45 PM
Any updates?
Posted By: jpilone
Re: Updated pictures..March 18th 2011 - 05/12/11 02:04 PM
Give us some updates!
Posted By: jeff_past
Re: Updated pictures..March 18th 2011 - 05/12/11 07:53 PM
Posted By: Edison62
Re: Updated pictures..May 23rd 2011 - 05/24/11 01:44 PM
Posted By: Edison62
Re: Updated pictures..May 23rd 2011 - 05/24/11 01:47 PM
Heres the last few...
When Jeffery was taking the car apart he found this inside the front splash pan!!!! Magnetic key holder w/spare ignition key and house key??? It's been there 20+ years!
Bryan
Posted By: ChryCoGuy
Re: Updated pictures..May 23rd 2011 - 05/26/11 09:54 PM
Looking good Bryan!
Posted By: anlauto
Re: Updated pictures..May 23rd 2011 - 05/27/11 12:11 AM
Looks great Bryan...I have a 70 Super Bee coming here in July...Can't wait to get started on that one...
Posted By: Edison62
Re: Updated pictures..May 23rd 2011 - 05/27/11 12:43 AM
Tnx guys.... I really think we're almost over the hump!! As mentioned, the complete drive train is done and ready to go in! I'm crossing my fingers to see it on the road by the end of July.........
Bryan
Posted By: Edison62
Re: Updated under hood pictures..30th 2011 - 05/30/11 06:19 PM
Here's more photos. Just got the engine area painted, this it the finish coat, along with some under coating in the front wheel wells..... next is the door jams and trunk area!
Bryan
Posted By: Anonymous
Re: Updated under hood pictures..30th 2011 - 05/30/11 06:44 PM
Wow!
Posted By: Keith Black®
Re: Updated under hood pictures..30th 2011 - 05/30/11 09:53 PM
..looks great
Posted By: johnscudashop
Re: Updated under hood pictures..30th 2011 - 05/30/11 10:19 PM
awesome!!!!!!!!!!!!
Posted By: cornet684me
Re: Updated under hood pictures..30th 2011 - 06/02/11 04:33 AM
awsome Bryan,
can't wait to see it finished, i am bias, i love plum crazy!!
Posted By: Edison62
Re: Updated pictures.. July 6th 2011 - 07/07/11 03:41 AM
Got a few pictures to share.....
Jammed out in FC-7........
Original trunk floor.....
Doors are jammed out....
Now for some white interior pieces....
And doors again....
Pretty pumped now!!!!!!!!!!
Bryan
Posted By: 71 Charger R/T
Re: Updated pictures.. July 6th 2011 - 07/07/11 03:59 AM
WOW Bryan! I'd be pumped too! That looks great. Keep the pictures coming.
Posted By: Edison62
Re: Updated pictures.. July 6th 2011 - 07/09/11 01:35 AM
Got this.......
Posted By: cornet684me
Re: Updated pictures.. July 6th 2011 - 07/09/11 05:15 AM
Brian
i really like the white on the interior metal, that is going to look killer with the white seats
Posted By: 68427vette
Re: Updated pictures.. July 6th 2011 - 07/11/11 10:16 PM
awsome job,, off topic, a little,, what did you use for 1/4s. or lowers?? my 70 Superbee, needs some patches,, and take off's are non existant. ?? thanks in advance,, i ve seen 1/2 quarters sold,, i thought of going that route, and cutting them up to the pieces i need to patch on mine... jc
Posted By: Edison62
Re: Updated pictures.. July 6th 2011 - 07/12/11 08:59 PM
First off, thanks for checking out my car.
Lyndon, I should have more pictures by the weekend... dash resto right now!!! Randy, I agree.. the white is the perfect color to go w/Purple.
Jeff, as for the patch panels. Got them @ a local parts supplier in Sydney N.S. (R.W.Hawkins) they had them listed in their parts book... I believe around $150.00 per side..... we used one drop down also listed in his book... car is all original panels! I was lucky!
Tnx,
Bryan
Posted By: Edison62
Updated pictures.. July 23Rd 2011. fenders & seats! - 07/24/11 03:54 AM
Got a few pic's of the fenders before they get mounted for the last time (hopefully)...... factory under coating ... I love the look!!! Not overdone in my eyes.....
Bryan
Now the seats....
After dealing w/PG Classic's and getting the incorrect covers I bought a set from Dante's and they fit great, correct fit, correct material & color! (I'm in need of a knob for the side of the seat... releases it to go forward, if you have one please PM me).
Bryan
Posted By: cornet684me
Re: Updated pictures.. July 23Rd 2011. fenders & seats! - 07/24/11 05:12 AM
Bryan, i got all my interior from Dante, AAAAA++++++, i love the white, i went with Pearl white and white headliner and white door panels, good contrast.
keep up the good the work!!
Posted By: Edison62
Re: Updated pictures.. July 23Rd 2011. fenders & seats! - 07/24/11 05:51 AM
Randy, thanks for the kind words... for sure, you get what you pay for. Feel free to send me off a link to the pic's of your car... address is
bigblkmopar@yahoo.caTnx again,
Bryan
Posted By: cornet684me
Re: Updated pictures.. July 23Rd 2011. fenders & seats! - 07/26/11 04:42 AM
Bryan, i do not have a link, i will email you some pics
Posted By: Edison62
Re: Updated pictures.. July 27th.... more pictures.... - 07/28/11 12:16 AM
Got these to post......
"K" frame... front end parts and some of the firewall back in.....
Dash in place, this was a complete FK-5 Dash (correct Super Bee) with gauges redone along with new woodgrain & painted black..... white on doors......
Sitting outside waiting for a complete wet sanding before white vinyl roof & windows... then final exterior paint..
Pumped......
Bryan
Posted By: jrwoodjoe
Re: Updated pictures.. July 27th.... more pictures.... - 07/28/11 03:10 AM
Looks nice Bryan, no wonder you're pumped.
Posted By: DPelletier
Re: Updated pictures.. July 27th.... more pictures.... - 07/28/11 05:05 PM
looking good!
Dave
Posted By: Edison62
Re: Updated Aug 18th 2011................ - 08/19/11 02:12 AM
Ok... this past Monday got the vinyl roof installed as well as the roof liner.
Roof liner is in....
Laying it out...
Prep....
Installed.
Rear shot.
Profile.
Bryan
Posted By: DPelletier
Re: Updated Aug 18th 2011................ - 08/19/11 05:08 PM
getting better all the time! keep up the good work
...you don't have a spare N96 hood do you?
Dave
Posted By: magnumcharger
Re: Updated Aug 18th 2011................ - 08/19/11 05:30 PM
Wow! Looking fantastic Bryan!!
I wonder if your cousin would be interested in painting my Charger?
Posted By: Edison62
Re: Updated Aug 18th 2011................ - 08/20/11 03:06 PM
.. thanks for the
Dave.... and sorry... no N96 hood, although I do have the original white hood off my car and a set of scoops for a spare!
Robin.... Jeffery does fantastic work and it would be worth your while to haul the 68 Charger to Cape Breton once it's ready for paint....
Bryan
Posted By: Edison62
Re: Updated Oct 12th 2011................ - 10/12/11 01:29 PM
... slow and steady...
More under hood work done, still need to swap out the white bolts for purple ones.... brake lines from "Fine Lines" are nice.
Also need to paint the underside of the hood inserts....
Wet sanded as we speak, should see finish paint in the next week or two!
Bryan
Posted By: DPelletier
Re: Updated Oct 12th 2011................ - 10/12/11 05:05 PM
Looking great; did you paint your battery tray?
Dave
Posted By: Edison62
Re: Updated Oct 12th 2011................ - 10/12/11 05:30 PM
Quote:
Looking great; did you paint your battery tray?
Dave
Nope... It's black as purchased..
Bryan
Posted By: DPelletier
Re: Updated Oct 12th 2011................ - 10/12/11 08:56 PM
Quote:
Quote:
Looking great; did you paint your battery tray?
Dave
Nope... It's black as purchased..
Bryan
Just a friendly reminder to paint it (and the support bracket) while you have the FC7 paint out.
Dave
Posted By: Edison62
Re: Updated Oct 12th 2011................ - 10/12/11 09:01 PM
Quote:
Quote:
Quote:
Looking great; did you paint your battery tray?
Dave
Nope... It's black as purchased..
Bryan
Just a friendly reminder to paint it (and the support bracket) while you have the FC7 paint out.
Dave
Didn't know that was correct....
Tnx,
Bryan
Posted By: DPelletier
Re: Updated Oct 12th 2011................ - 10/12/11 11:26 PM
Well, you learn something here every day!
(at least I do!
)
Dave
Posted By: 69bronzeT5
Re: Updated Oct 12th 2011................ - 10/13/11 08:20 AM
Wow, it looks awesome!!! Really have to go pick mine up soon and bring it home (it's been in storage since 2008).
Posted By: Edison62
Re: Updated Oct 13th 2011................ - 10/13/11 06:50 PM
Windshield is in... trim is polished and looks great!!!! Working on the rear now.....
Bryan
.jpg "6869610-imagejpeg_2(2).jpg")
Posted By: ChryCoGuy
Re: Updated Oct 13th 2011................ - 10/14/11 02:53 PM
Lookin' great, Bryan! You do nice work!!
Posted By: Edison62
Re: Updated Oct 16th 2011................ - 10/17/11 12:17 AM
Quote:
Lookin' great, Bryan! You do nice work!!
Tnx Mark, but the only time my hands were on the body of this car was pushing it around....lol! My nephew Jeffery has handled all the body, prep & paint work.... the vinyl top, headliner and glass install were farmed out. Here's some better pictures...
Windshield installed.. note the front speakers added w/the help of a custom adapter available from a fellow Moparts member.....the original "G" code VIN was put back on the car with correct rivets.
Rear window installed.. note the original white paint still on the rear shelf.....
Bryan
Posted By: ChryCoGuy
Re: Updated Oct 16th 2011................ - 10/17/11 05:46 PM
The body looks great (props to your nephew) but so does everything else! Can't wait to see it done!
Posted By: Edison62
Re: Updated Oct 16th 2011................ - 10/17/11 06:46 PM
Quote:
Can't wait to see it done!
Mark, I'm told by the end of November.... that would actually put it @ two years almost to the day as it was in the garage in the summer but work didn't start on it until Nov of 2009... not bad considering Jeffery has a full time job, many other side projects & my car!
I wouldn't dare ask him to even look @ my red truck....lol....
Bryan
Posted By: Edison62
Re: Updated Oct 16th 2011................ - 10/19/11 11:28 PM
Just picked these up from a fellow Moparts member (Moparguy1967) for the Super Bee.
American Racing Thrust D Chrome Wheels
(2) 15x8.5 with 3.75 bs
(2) 15x7 with 3.75 bs
Also ordered another set of wheel opening moldings as the one's from METRO SUCK! The rears don't fit.... so a second set is on it's way from Dale's Cuda Shop.
Bryan
Posted By: DPelletier
Re: Updated Oct 16th 2011................ - 10/20/11 05:39 PM
Quote:
Just picked these up from a fellow Moparts member (Moparguy1967) for the Super Bee.
American Racing Thrust D Chrome Wheels
(2) 15x8.5 with 3.75 bs
(2) 15x7 with 3.75 bs
Also ordered another set of wheel opening moldings as the one's from METRO SUCK! The rears don't fit.... so a second set is on it's way from Dale's Cuda Shop.
Bryan
Let us know how they fit.
Dave
Posted By: Edison62
Re: Updated w/pic's Oct 20th 2011................ - 10/20/11 09:22 PM
Thought I'd share these...small steps but still steps.
Dropped the original gas tank and found pristine clean metal. Nice to see.....
Rear sail panels are in....
Front windshield moldings are in as is the rear view mirror & steering column which has been converted to a floor shift column.
Bryan
Posted By: 68KillerBee
Re: Updated w/pic's Oct 20th 2011................ - 10/21/11 12:14 AM
Random Question?
What color should the rear deck shelf be painted?
Exterior color?
Interior color?
You can see through the speaker holes when you put in the rear package tray deal.
Posted By: Edison62
Re: Updated w/pic's Oct 20th 2011................ - 10/21/11 02:27 AM
Quote:
Random Question?
What color should the rear deck shelf be painted?
Exterior color?
Interior color?
You can see through the speaker holes when you put in the rear package tray deal.
Devin, my understanding is the rear deck shelf should be painted body color.
Bryan
Posted By: DPelletier
Re: Updated w/pic's Oct 20th 2011................ - 10/21/11 05:40 PM
Quote:
Quote:
Random Question?
What color should the rear deck shelf be painted?
Exterior color?
Interior color?
You can see through the speaker holes when you put in the rear package tray deal.
Devin, my understanding is the rear deck shelf should be painted body color.
Dave
Bryan
Posted By: Edison62
Transmission w/pic's Oct 24th 2011................ - 10/24/11 07:58 PM
Getting the drive train ready to go in. Here's the transmission.
Bryan
Posted By: Edison62
Re: Engine & Transmission in....Oct 28th 2011...... - 10/29/11 02:20 AM
Got a few more pic's from the past few days...
Flywheel and clutch in place...
My father (Donnie) and Jeffery's father(Steven) dropping the big block in....
Looks good in it's new home...
Bryan
Posted By: 440beep
Re: Engine & Transmission in....Oct 28th 2011...... - 10/29/11 04:57 PM
I have a couple of questions to ask you.
Are you using the motor out of the 71 3004bbl440 HP
Second question: did you have the motor rebuilt and put to neutral balance.
If you didn't71 4bbl 440 HP's are externally balanced 6 pack rods vibration damper, you need to use a 6 pack fly wheel, not one off of a neutral balance motor,
Posted By: 440beep
Re: Engine & Transmission in....Oct 28th 2011...... - 10/29/11 05:17 PM
go here and look at the fly wheel at .photobucket.com
71gtx_2007's album
Posted By: Edison62
Re: Engine & Transmission in....Oct 28th 2011...... - 11/01/11 12:59 PM
Quote:
I have a couple of questions to ask you.
Are you using the motor out of the 71 3004bbl440 HP
Second question: did you have the motor rebuilt and put to neutral balance.
If you didn't71 4bbl 440 HP's are externally balanced 6 pack rods vibration damper, you need to use a 6 pack fly wheel, not one off of a neutral balance motor,
Hey Kevin... yes it was put to neutral balance. I couldn't get your photobucket link...????
Bryan
Posted By: 440beep
Re: Engine & Transmission in....Oct 28th 2011...... - 11/04/11 03:51 PM
photobucket.com
71gtx_2007
plymouth
Posted By: Edison62
Re: Engine & Transmission in....Oct 28th 2011...... - 11/07/11 08:55 PM
Quote:
photobucket.com
71gtx_2007
plymouth
Nice pic's Kevin....
Posted By: Edison62
Rear finish panel & rear diff restored and ready to go! - 11/07/11 09:01 PM
Well, the car is booked to go into the paint booth this Saturday (Nov 12th)!
Here's the original 41 year old rear finish panel.... I checked into getting it restored and was quoted $500.00 to have it done. Jeffery peeled off the original dealer sticker and it looked brand new so.... he hit it w/150 grit to take off the oxidized coating then 200 grit and so on and so on... then buffed it out..masked it off and added the red paint. Just need to attach the Super Emblem and it's done...saved a bit of coin!
Before:
After:
Rear diff ready to go in also..... new leaf springs, shackles & bushings will be used also.
Bryan
Posted By: DPelletier
Re: Rear finish panel & rear diff restored and ready to go! - 11/08/11 06:18 PM
Finish panel looks great. I can hardly wait to see the pics after the weekend!
......remember to let me know if you're missing anything; still have lots of spare stuff.
Dave
Posted By: 440beep
Re: Rear finish panel & rear diff restored and ready to go! - 11/08/11 07:38 PM
Posted By: 67plymouthman
Re: Rear finish panel & rear diff restored and ready to go! - 11/11/11 03:00 AM
Rear panel looks GREAT!! Did he clear coat? Did he sand it by hand or DA, wet or dry? I am in the same situation and would rather keep my $500.
Thanks!
Posted By: Edison62
Car is in the paint booth today.... Nov 12th, 2011 - 11/12/11 01:28 PM
Well, it's been two years almost to the day and it's in the paint booth today!!!!!! Hope to have some pictures up soon. It's come along way from sitting on the trailer waiting to come east!
Bryan
Posted By: Edison62
Re: Car is in the paint booth today.... Nov 12th, 2011 - 11/12/11 06:39 PM
Ok... here's a shot from the paint booth.... getting the last coat of clear!!!!!
Bryan
Posted By: NV69B7RR
Re: Car is in the paint booth today.... Nov 12th, 2011 - 11/12/11 07:12 PM
Can't wait to see it out of the booth!!
Posted By: Edison62
UPDATED!! Car is painted........ Nov 14th, 2011 - 11/14/11 05:58 PM
Posted By: CDN72SE
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/14/11 06:08 PM
Simply beautiful you must be on cloud nine.
Posted By: chromedome426
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/14/11 07:06 PM
Hey....looks like you are getting close enough to actually go for a drive in it before the snow arrives.
Posted By: DPelletier
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/14/11 08:43 PM
Quote:
Ok guys... I'm one super pumped up Mopar owner!!!
I'll have more pictures as the re-assembly moves forward but this is what it looks like as of today, Monday the 14th November...2011!
Bryan
& a Vodka!
Awesome Bryan, It's a great feeling to get it finally in color, isn't it?
looks great! Love the white top with it. I know you are going with different wheels, but I have to say it looks pretty cool as-is.
Dave
Posted By: 440jimr
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/15/11 04:27 AM
Absolutely beautiful!
Posted By: cornet684me
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/16/11 05:20 AM
Posted By: Edison62
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/17/11 05:52 AM
Quote:
Great Job Bryan, Awsome Car, but then again i am a little partial to plum crazy and white!!
Randy, your car looks great! I may need to go w/white letter tires after seeing yours.
Tnx for all the kind words guys.... the goal is to have the car ready to go the weekend of Dec 3rd. Hoping the roads are clear and the weather is still good so I can do some...... hmmmmmm..... tire testing!
Bryan
Posted By: Anonymous
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/18/11 06:10 AM
And what.......get salt all over that car.
Posted By: 1_WILD_RT
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/18/11 06:43 AM
Looks great!!!
Posted By: Edison62
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/18/11 08:24 AM
Quote:
And what.......get salt all over that car.
As of today.. + 15 degrees..... we'll see how the weather goes and go from there...
Bryan
Posted By: Edison62
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/18/11 08:55 AM
All it good....lovin' my 70 Super Bee.
Posted By: 440beep
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/19/11 05:18 PM
Posted By: DPelletier
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/21/11 05:57 PM
Quote:
Randy, your car looks great! I may need to go w/white letter tires after seeing yours.
Bryan
Didn't you buy some chrome TT's? My car looks pretty much like the '68 above, but I tell you what I wish I did; put a set of repro Polyglass tires on the steelies and a set of RWL radials on the aftermarket wheels.
Dave
Posted By: Edison62
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/21/11 07:09 PM
Quote:
Quote:
Randy, your car looks great! I may need to go w/white letter tires after seeing yours.
Bryan
Didn't you buy some chrome TT's? My car looks pretty much like the '68 above, but I tell you what I wish I did; put a set of repro Polyglass tires on the steelies and a set of RWL radials on the aftermarket wheels.
Dave
Hey Dave, you hit the nail on the head! I'm going to destroy the tires that are on it now (Canadian Tire Blackwalls)... then replace them w the Polyglass repops. I did pick up a nice set of 15" Chrome Torque Thrusts that I'll be putting some WLT's on for a change.... just can't decide exact size and which WLT's to go with.....
American Racing Thrust D Chrome Wheels
(2) 15x8.5 with 3.75 bs
(2) 15x7 with 3.75 bs
Bryan
Posted By: DPelletier
Re: UPDATED!! Car is painted........ Nov 14th, 2011 - 11/22/11 12:16 AM
Quote:
Quote:
Quote:
Randy, your car looks great! I may need to go w/white letter tires after seeing yours.
Bryan
Didn't you buy some chrome TT's? My car looks pretty much like the '68 above, but I tell you what I wish I did; put a set of repro Polyglass tires on the steelies and a set of RWL radials on the aftermarket wheels.
Dave
Hey Dave, you hit the nail on the head! I'm going to destroy the tires that are on it now (Canadian Tire Blackwalls)... then replace them w the Polyglass repops. I did pick up a nice set of 15" Chrome Torque Thrusts that I'll be putting some WLT's on for a change.... just can't decide exact size and which WLT's to go with.....
American Racing Thrust D Chrome Wheels
(2) 15x8.5 with 3.75 bs
(2) 15x7 with 3.75 bs
Bryan
I think I mentioned this before, but I used 235/70/15's on 15x7's up front and 275/60/15's on 15x8" on the back (4.5" BS IIRC). my would be that anything larger on the rear may look goofy. Disclaimer; the fronts rub at full lock.....but I wanted them to be the same height as the rears (28") so I could use one spare as well as for asthetic considerations.
Dave
Posted By: Edison62
Getting your stripe on!!!! Nov 27th/2011 - 11/28/11 01:07 AM
Here's a quick shot of the Bee with it's new stripe.....
Better pic's coming.
Bryan
Posted By: Edison62
Big moves...... almost done!!!!! Nov 27th/2011 - 11/28/11 05:30 AM
Posted By: dmoore
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 11/28/11 02:34 PM
Fantastic job! Love the FC7 & white!
Posted By: ChryCoGuy
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 11/28/11 04:18 PM
Lookin' good!
Posted By: DPelletier
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 11/28/11 05:22 PM
Car looks AWESOME, Bryan!
I can't believe you caught up and passed me in 2 weeks!
You've been burnin' the midnight oil!
So hurry up and get the grills and side marker lights in, then you can take "finished" outside pics.
Are those the "Dale's Cuda Shop" wheel opening mouldings? how do they look up close and how hard were they to get fit? especially interested in the rears.
Dave
Posted By: jeff_past
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 11/28/11 05:47 PM
The "Dales Cuda Shop" mouldings fit like a glove, 1000% better then the original set i tried to make fit from Metro. There was no rebending/hammering with the rear ones to make them fit the contours as they should.
Still alot of little pieces to get finished yet... hoping to have it running in the next few days.
As for the questions above on the rear tail panel.... I sanded the coating off using 180 grit paper, switching to 320 once 70% of it was off. Once all of the coating was off i worked my way up using 320, 400, 600, 800, 1000, 1200, 1500, all wet paper. Then polished with autosol. The panel is just buffed by hand in those pics, but it could also then be machine buffed, and clear could be added at this point as well if desired.
Posted By: Edison62
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 11/28/11 06:03 PM
Quote:
Car looks AWESOME, Bryan!
I can't believe you caught up and passed me in 2 weeks! You've been burnin' the midnight oil!
So hurry up and get the grills and side marker lights in, then you can take "finished" outside pics.
Are those the "Dale's Cuda Shop" wheel opening mouldings? how do they look up close and how hard were they to get fit? especially interested in the rears.
Dave
Thanks for the comments...
Dave... I wish I could take the credit but.. it's Jeffery (see posting above...Jeff_Past) that's been putting in the overtime! He's done a Fantastic job on the car and enabled me to get my "Dream Car" at a price I could afford! I got the family discount.....lol!
It's in for exhaust today (Monday) and as Jeffery mentioned.. should be running soon. It's going to be a loooooooooong winter looking at it in the garage! 
... but it is + 12degrees here today so I may get it out for a spin before winter settles in for good 
.
Bryan
Posted By: DPelletier
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 11/28/11 06:25 PM
Thanks guys; looks like I'll order a set of the mouldings from Dale's: the Metro parts look like AZZ and don't come close to fitting.
I'll add them to the spare ramcharger duct and 100 other repop pces that weren't good enough to use!
Dave
Posted By: 69bronzeT5
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 11/30/11 07:51 AM
WOW Bryan!!!! I'm simply speechless. The car looks absolutely FANTASTIC!
Posted By: CrAzYMoPaRGuY
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 11/30/11 08:40 AM
Love the car, it looks awesome!!!!!!!
I love the bench seat too!!
Posted By: Edison62
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 12/01/11 02:44 AM
Tnx for all the + words. Hoping to get the engine fired in the next day or so....... it's quite a feeling!
Bryan
Posted By: DPelletier
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 12/01/11 06:07 PM
Posted By: Edison62
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 12/01/11 10:26 PM
Quote:
Just remember that you shouldn't stand in front of the car with the engine running.....even if it's in park with the emergency brake on!!
Dave
You are one lucky man Dave.... as for mine if it's running w/the brake on it better be in NEUTRAL!! after all it's a 4 speed........
Bryan
Posted By: DPelletier
Re: Big moves...... almost done!!!!! Nov 27th/2011 - 12/01/11 10:29 PM
Oh yeah, forgot it was a 4 gear......but still; be careful!
Dave
Posted By: Edison62
Dec 11th... it's DONE!!!! Christmas comes early!!! - 12/12/11 01:23 AM
Well, it's almost done.. two years to the day it was started in 2009! It's home in the garage with still some small stuff to do but that's fine....it's winter!
I hope to have a vid up of it tomorrow w/some better pic's but for now, here's what I have!
Getting loaded...
In the trailer...
Home in the garage...
Bryan
Posted By: dmoore
Re: Dec 11th... it's DONE!!!! Christmas comes early!!! - 12/12/11 02:10 AM
Bryan that is one sharp Bee my friend, Merry Christmas!......somebody's gonna have fun in the garage...
Posted By: moopa
Re: Dec 11th... it's DONE!!!! Christmas comes early!!! - 12/12/11 02:40 AM
What a great project! You should be very proud, can hardly wait to see some more pics. Also, your shop looks awesome, great space to hang out and enjoy your hobby. Nicely done sir..
Mark
Posted By: 68-scatpack-rt
Re: Dec 11th... it's DONE!!!! Christmas comes early!!! - 12/12/11 02:45 AM
the car looks great bryan! i really dig the plum crazy and the white.
the 4 gear will be a blast!
Posted By: chromedome426
Re: Dec 11th... it's DONE!!!! Christmas comes early!!! - 12/12/11 02:50 AM
Congratulations Bryan on getting it finished(or almost) and back home safe and sound.
Hey, I recognize that trailer from the Drag Races, Looks like Robert Hogans trailer.
Posted By: Anonymous
Re: Dec 11th... it's DONE!!!! Christmas comes early!!! - 12/12/11 04:32 AM
Most excellent, you are now a jedi (almost)
Posted By: Edison62
Re: Dec 12th... Video link..... - 12/12/11 07:39 PM
Thanks guys, I still can't believe its mine!!lol!
A few things left to do, grilles painted, fender emblems, headrest trim, rear package tray, hidden stereo, gas pedal, reverse light, front shocks..etc...etc... but it's close. We'll be ready to go for the spring....
Again, a "HUGE" tnx out to Jeffery for all his work and my wife Shannon & Father Donnie for all their support & help! It's a family thing.....
So, here's a link to a vid I shot today... pictures to follow.....
http://www.youtube.com/watch?v=oloGGZLk2MU&feature=mfu_in_order&list=UL Bryan
Posted By: Edison62
Re: Dec 12th... out in the sun! - 12/12/11 07:49 PM
Posted By: 440jimr
Re: Dec 12th... out in the sun! - 12/13/11 12:56 AM
Awesome car and great video!
Posted By: Edison62
Re: Dec 12th... out in the sun! - 12/14/11 05:56 PM
Tnx Jim... I'm really happy w/the car. It sounds great.... and looks fantastic. Can't wait for spring/summer to put some serious miles on it.
Bryan
Posted By: jrwoodjoe
Re: Dec 12th... out in the sun! - 12/15/11 04:37 PM
Bryan, car is turning out so nice. Heck, I'm getting excited and it's not even my car.
Joe
PS, your garage rocks too.
Posted By: Darius
Re: Dec 12th... out in the sun! - 12/18/11 02:07 AM
What a BEAUTY!!!!!
Posted By: DusterKrazy
Re: Dec 12th... out in the sun! - 01/16/12 03:21 AM
It looks fantastic!!
Posted By: Edison62
Re: Dec 12th... out in the sun! - 01/16/12 09:54 PM
... tnx for the + words guys. I've been playing around under the car tweaking the shifting rods...torsion bars....etc. Had our young lad under the car w/me... got him tightening up the shifter rods on the side of the transmission and some other stuff.. he was pumped... I was proud!
Next is installing the hidden stereo, tach and some other wiring....
Bryan
Posted By: XS29L9B4Speed
Re: Dec 12th... Video link..... - 01/17/12 05:35 PM
Great video. The sound is amazing. I love the idle. It shook the windows in my own house. I'm looking forward to hearing that in my own driveway soon.
Posted By: 71 Charger R/T
Re: Dec 12th... out in the sun! - 01/19/12 05:47 AM
Absolutely STUNNING Bryan! You should be proud! You took a plain vanilla coronet and transformed it into the most desirable combination (all around) a guy could ask for. And you've got your son involved to boot! Cherish those moments. It's been fun watching your progress. EXCELLENT JOB!! Can't wait to see it with the grilles. Nice man cave by the way.
Posted By: Hemiruss
Re: Dec 12th... out in the sun! - 01/23/12 08:07 PM
Nice looking ride you'll enjoy cruising around in that beauty.I hadn't check up on the build in awhile but it looks nice...I just got the call that my Grandpa passed away in Yarmouth.As you know there is now easy way to get there,so I may have to fly in you town and drive....YUK YUK.Can't remember the last time I had to drive in the cold/snow.....
OK enough of my misery BUT YOU BUILT A BEAUTY THERE....
Posted By: Edison62
Re: Dec 12th... Video link..... - 01/27/12 06:13 PM
Quote:
Great video. The sound is amazing. I love the idle. It shook the windows in my own house. I'm looking forward to hearing that in my own driveway soon.
Tnx Jeff... my neighbors didn't look happy....lol!
Lyndon, I agree with the color combo. I think it's the best Mopar offered!! My young lad is having fun playing around w/the car...he's also just started building models.
.... Russ.... sorry to hear of your loss. You are correct, no easy way to get to Yarmouth. If you fly into Halifax and require anything let me know. Tnx for the + words on the Bee... we're very happy with it. I really like the color combo on yours.... factory color on the stripe?
We're hoping to have the grille's painted and in soon. Just ordered 4 new shocks and a reverse shift rod also.
Bryan
Posted By: Edison62
Re: Feb 2nd...... finishing it off..... - 02/02/12 02:43 AM
... getting some more stuff done. Picked up the shocks yesterday...KYB's.. Gas-A-Just for the front & Excel-G for the rear. Removed the decals from both, need to paint the front's black then install.
Also, finally decided where to put the tach... not a fan of huge tach's and couldn't bring myself to cut into the hood for a Dixco. So, had this small older one, going to mount it on the left "A" pillar....
MTF......
Bryan
Posted By: jeff_past
Re: Feb 2nd...... finishing it off..... - 02/02/12 02:28 PM
Can't wait to see it again this weekend. It's certainly different not seeing it everyday. I miss it, in a strange no i don't want it back kind of way.
hahaha
Posted By: Edison62
Re: Feb 7th.. new (to me) correct breather! - 02/07/12 02:45 PM
Well, the Tach is in & working, shocks are on, choke hooked up and carb adjusted.
Also, a big "Thanks" out again to my friend Robin aka:MagnumCharger for helping me score a correct breather for my car....! as always, much appreciated! Just a little paint and it will be as good as new!
Bryan
Question, is the orange for the breather the same color as the engine???
Posted By: LimeliteAero
Re: Feb 7th.. new (to me) correct breather! - 02/07/12 02:58 PM
originally a 70 4bbl breather is Black wrinkle.
Posted By: Edison62
Re: Feb 7th.. new (to me) correct breather! - 02/07/12 06:37 PM
Quote:
originally a 70 4bbl breather is Black wrinkle.
Tnx Dave, PM sent.
Bryan
Posted By: 70gtx440dana
Re: Feb 7th.. new (to me) correct breather! - 02/08/12 05:18 AM
Noticed you went with a 3 nipple valve cover breather...just wanted to point out that this was only correct for N95 California emissions in 70. A single nipple breather would have been used on all non N95 applications. Keep up the nice work!!!
Posted By: Edison62
Re: Feb 7th.. new (to me) correct breather! - 02/08/12 12:50 PM
Quote:
Noticed you went with a 3 nipple valve cover breather...just wanted to point out that this was only correct for N95 California emissions in 70. A single nipple breather would have been used on all non N95 applications. Keep up the nice work!!!
Tnx Joe... I had an idea it was incorrect....lol. It's great to get these things fixed before cruzin/show season starts.... I want it to look as correct as possible.
Tnx again guys....
Bryan
Posted By: magnumcharger
Re: Feb 7th.. new (to me) correct breather! - 02/14/12 03:33 PM
Quote:
Well, the Tach is in & working, shocks are on, choke hooked up and carb adjusted.
Also, a big "Thanks" out again to my friend Robin aka:MagnumCharger for helping me score a correct breather for my car....! as always, much appreciated! Just a little paint and it will be as good as new!
Bryan
Glad to help a friend!
Posted By: Edison62
Re: Feb 14th... the transmission is out!!!! :o( - 02/14/12 09:22 PM
Ok... well had some trouble with the 4 speed so it's now out on the bench. I'm thinking a bent fork...
happy it's winter... a good time to get the bugs out!
Bryan
Posted By: moopa
Re: Feb 14th... the transmission is out!!!! :o( - 02/15/12 01:03 AM
Quote:
Ok... well had some trouble with the 4 speed so it's now out on the bench. I'm thinking a bent fork... happy it's winter... a good time to get the bugs out!
Bryan
It's winter there? 
By the way...looking great!
Mark
Posted By: jeff_past
Re: Feb 14th... the transmission is out!!!! :o( - 02/16/12 05:32 PM
Quote:
Ok... well had some trouble with the 4 speed so it's now out on the bench. I'm thinking a bent fork... happy it's winter... a good time to get the bugs out!
Bryan
Uh Ohhh, that doesn't sound good. 
Posted By: Edison62
Re: Feb 14th... the transmission is out!!!! :o( - 02/18/12 04:20 AM
Quote:
Quote:
Ok... well had some trouble with the 4 speed so it's now out on the bench. I'm thinking a bent fork... happy it's winter... a good time to get the bugs out!
Bryan
Uh Ohhh, that doesn't sound good.
Not so bad... tranny is good, shifter mechanism is bad! Ordered a rebuild kit & new reverse rod from Brewers transmission....
Bryan
Posted By: unknown
Re: Dec 11th... it's DONE!!!! Christmas comes early!!! - 02/18/12 04:47 PM
Quote:
Well, it's almost done.. two years to the day it was started in 2009! It's home in the garage with still some small stuff to do but that's fine....it's winter!
I hope to have a vid up of it tomorrow w/some better pic's but for now, here's what I have!
Getting loaded...
In the trailer...
Home in the garage...
Bryan
Car looks great, I'm digging the KISS poster. 
Posted By: Edison62
Re: Dec 11th... it's DONE!!!! Christmas comes early!!! - 02/21/12 08:49 PM
Hey Mark... yup, it's winter up here!! lol... tho not much snow! Tnx for the + commments....
As for the KISS poster....been a fan since 74 or so, tried to put things in the garage that I enjoyed in life or items to reflect my personality!Got an old poster of Farrah Fawcett, Bobble Head Evil Knievel, some toy's circa late 60's/early 70's..etc..etc..
http://www.youtube.com/watch?v=jJsKR83tj3IBryan
Posted By: Edison62
March 30th..... baby steps..... - 03/30/12 05:05 AM
Been playing around... got the tach in and hidden off to the side as I wanted. Also got the chrome on the headrests, and pulled the front wheels to paint the drums. Got the inner splash pans ready to go so all is good.....
Bryan
Posted By: Edison62
Re: May 6th...... we have grilles! - 05/07/12 02:04 AM
Ok, the grilles are done! We are hoping to have the car ready to go for the next local cruise night (every Thursday)....... really happy w/the way the grilles turned out!
Bryan
Posted By: DPelletier
Re: May 6th...... we have grilles! - 05/07/12 06:48 PM
Grills look great!
Nice to seem some properly painted for a change.
I have to paint some more for mine after my right elbow went through my grill in my little "Christine incident".
Dave
Posted By: Edison62
Re: May 6th...... we have grilles! - 05/07/12 08:42 PM
Quote:
Grills look great! Nice to seem some properly painted for a change.
I have to paint some more for mine after my right elbow went through my grill in my little "Christine incident".
Dave
Tnx Dave..... see if you had put a 4 speed in it that wouldn't have happened! YOU were a lucky man!
Posted By: Edison62
Re: May 6th...... we have grilles! - 05/07/12 08:47 PM
Playing around today... got the 4 speed boot and ring in as well as the sunvisors and the trunk weather stripping.
Bryan
Posted By: DPelletier
Re: May 6th...... we have grilles! - 05/08/12 09:16 PM
Quote:
..... see if you had put a 4 speed in it that wouldn't have happened!
Dave
Posted By: SixPackRT
Re: May 6th...... we have grilles! - 05/09/12 06:28 PM
Quote:
Ok, the grilles are done! We are hoping to have the car ready to go for the next local cruise night (every Thursday)....... really happy w/the way the grilles turned out!
Bryan, You should be happy, they turned out great! Time consuming to do but the end result is worth it when seeing them in! Great job!
Scott
Posted By: Edison62
July 13th...... we have new wheels!!! yay!!! - 08/13/12 10:00 PM
Posted By: MuuMuu101
Re: July 13th...... we have new wheels!!! yay!!! - 08/14/12 12:30 AM
Shiny!!!
Crazy blue swirl on pic 3.
Posted By: RUNCHARGER
Re: July 13th...... we have new wheels!!! yay!!! - 08/14/12 02:41 AM
Wow! That combo really brings that car to life. I wouldn't be taking those off anytime soon.
Sheldon
Posted By: Anonymous
Re: July 13th...... we have new wheels!!! yay!!! - 08/14/12 03:34 AM
Now that's more like it.
You can put the white lettering on the inside.
Posted By: DPelletier
Re: July 13th...... we have new wheels!!! yay!!! - 08/14/12 04:53 PM
lookin' good Bryan!
What did you end up going with for tire size?
I also like the steelie look, but yours (being narrower than the stock 15x7's) looked too small and they needed RWL's; looks much better.
Dave
Posted By: Edison62
Re: July 13th...... we have new wheels!!! yay!!! - 08/14/12 07:04 PM
Tnx guys, I was torn between these and the stock 15" Rallye's so now I need to get tires for them!
Dave, I agree the steel wheels were to narrow and had only painted them to have on the car while it was being worked on. The tires are 275/60/15's on the rear and 225/70/15's up front. Exactly the look I wanted and am really happy with them.
I painted the front drums this morning and will get the rears done to match the next rain day!!!
Here's a few more pictures...
Bryan
Posted By: DPelletier
Re: July 13th...... we have new wheels!!! yay!!! - 08/15/12 05:06 PM
Quote:
The tires are 275/60/15's on the rear and 225/70/15's up front. Exactly the look I wanted and am really happy with them.
Bryan
Perfect! I wish I went with 225's instead of 235's up front. plus it looks way better balanced than using a 60 series front.
Dave
Posted By: Edison62
Re: July 13th...... we have new wheels!!! yay!!! - 08/15/12 06:34 PM
A couple of night shots! I really need a better camera!
Bryan
Posted By: Anonymous
Re: July 13th...... we have new wheels!!! yay!!! - 08/16/12 12:39 AM
So what you are saying is that your car is to good for your camera right.........send the car to me and problem solved. I am glad I can be of service so when can I expect the car.
Posted By: Edison62
Updated...July 27th......the end is near! - 08/27/12 03:56 PM
Well, I really feel I've come full circle w/the 70 Super Bee "Replica"! We entered it in an all "Mopar" show over the weekend and took Best Dodge which was not an easy accomplishment considering the quality of cars presented.
I'm finishing off this thread with a huge thanks out to my wife Shannon for all her support, our boy Brady (my future wrench turner), Jeffery for the body and paint (and countless hours or extra work), Darrell for the drive train work and my father Donnie for all his help!
Lastly, tnx to you guys & gals for your comments and putting up w/me! By far the best website/community out there!
Bryan
From this....
To this....in two short years!!!!
Done.....
Posted By: Anonymous
Re: Updated...July 27th......the end is near! - 08/27/12 11:52 PM
Posted By: Edison62
Re: Updated...July 27th......the end is near! - 09/01/12 05:26 AM
Quote:
Congratulations Brian on a job well done by you and the others.
Wear it well you've earned it.
Tnx Robert, I appreciate your comments! I know how hard you've been working on yours and look forward to seeing it completed soon...
Bryan
Posted By: Anonymous
Re: Updated...July 27th......the end is near! - 03/31/13 09:38 PM
Bryan, did you ever send a pic of the completed car and trophy pics to the previous owner, would have loved to see the look on his face.
Posted By: Edison62
Re: Updated...July 27th......the end is near! - 07/05/13 11:25 PM
Robert, I do keep on touch w/the previous owner and he's seen the pictures of the completed car. He likes the outcome....
So, we brought the Bee out to its second show on the 22nd of June and got "Best Mopar". Again, very proud/happy with our Coronet!
Bryan
Posted By: Edison62
Updated......summer of 2013! - 09/12/13 06:07 AM
... a few updates.
We hit the Sackville Kinsman show this year and scored best Mopar.
Bryan
Posted By: Edison62
Re: Updated...July 27th......the end is near! - 09/12/13 06:10 AM
...next show was an all Mopar show at Blaikies Dodge in Truro N.S. Lots of very cool cars and we were voted "People's Choice"... the top award, amazing!
Bryan
Posted By: Edison62
Re: Updated...July 27th......the end is near! - 09/12/13 06:14 AM
...last show of the year for us was the local Dartmouth Dodge/Mopar Maritime Show the end of Aug. We were voted "Best Dodge"....!
Bryan
Posted By: Edison62
Re: Updated...July 27th......the end is near! - 09/12/13 06:16 AM
In the latest issue of "Canadian Hot Rod" the Coronet made an appearance. We are really happy with the car...!
Bryan
Posted By: Edison62
Re: Updated...July 27th......the end is near! - 09/12/13 06:20 AM
..we were contacted by
www.zazzle.com to use our car for their online sales. So, it's now featured on over 70 items under the "American Muscle" series. It's amazing how far the car has come.....! Can't believe how lucky we've been!!!
http://www.zazzle.com/1970+super+bee+giftsBryan
Posted By: Anonymous
Re: Updated...July 27th......the end is near! - 09/13/13 03:57 AM
Posted By: Edison62
Re: Updated...July 27th......the end is near! - 09/13/13 06:29 AM
Quote:
Now you're just showing off damit...................JK!
Congrats Bryan! Your car has a really nice balance of everything.
Sorry man....didn't want to come off that way. Just really happy/excited w/the car!
Bryan
Posted By: DPelletier
Re: Updated...July 27th......the end is near! - 09/13/13 05:13 PM
Congrats Bryan; you deserve it.
Dave
