Originally Posted by feets
Originally Posted by Jim_Lusk
Originally Posted by Mopar_Rich
Yep. Many people do that and are okay. Too bad you don't have enough space for a 1" spacer.


When you run this air cleaner and plan on using the air box as well things are real tight AND the neck is already cut down on the base...


Do what was suggested above. Pop a small hole in each side of the manifold below the carb pad and link them together with tube. Tie that to the map sensor. This assumes you have a separate map instead of an integrated unit.


I believe the Map Sensor in internal to the throttle body

“So if it’s on the internet it must be true”

Abe Lincoln