Originally Posted By Exit1965
For guys using the TFI or GM coil, which has a solid male end, and still using the Mopar distributor.

For the coil wire, do you just use a regular spark plug wire (not a regular Mopar coil wire which has 2 male ends that go into female sockets).. with the "spark plug" end on the coil and the other end on the distributor?


Basically, yep.

I took a spare wire, used the existing distributor socket terminal in the same place, cut it to length since it was way too long, and for the TFI coil I crimped on an hei terminal like this one: https://www.summitracing.com/parts/sum-850440

Although I am still running this on my C body as a solid low buck ignition, lately I have focused on the coil by itself....More research has shown the TFI coil to be approved by MSD for 6 and 7 series ignitions. While I have fancier aftermarket coils laying around, I think the TFI should be tested further.

Is anyone interested in a TFI coil bracket for
B/RB/gen 2 HEMI applications?

Rich H.

Esse Quam Videri