IMO, something is bent if you can't, at least, get matching positive numbers on both sides.
That said, offset bushings are what is typically used to gain some caster, but I believe there is another underlying issue here.
Installing bushings does require removing the UCA from the car and pressing them in/out.
https://www.manciniracing.com/trwmoofupcoa.html Car is mostly put back together and the UCA's are coated. It is likely the arms are not original but I am looking for the simplest "fix" without tearing into the car again.
Frame work is not an option. Also no damage found during restoration.
Bushings are new but could be replaced again.
Bolts are the easiest to replace at this point.
