30 years or so as I was going thru the traps I glanced and saw my oil pressure drop. It was an old fashioned.030 over stock crank, stock rod, TRW pistons build that ran highs 9’s in the 1/4 mile. I loaded up and took it home that Sunday. I pulled the oil pan on my open car trailer at home to take a peek. As I started with number one main I pulled the cap and the bearing looked great and left the cap off. Number two was fair and when I pulled the thrust cap I thought I saw something move. Well I did as the crank was busted in half. I pulled the engine on Monday and tore into it changing the crank and bearings. With two friends taking care of the rods I lowered a fresh crank in, finished it up, and raced that Friday. Man I wish I could work like that now. This was evening work as I worked 8-4 in the steel mill.