Originally Posted By 3hundred
Originally Posted By ric3xrt
Mock motor is in. The Mounts in these photos' are the V6 mounts from 88-93,
I've used Bouchillon's G3 mounts on 3 other swaps, but I'm not a fan of these mounts. http://bouchillonperformance.com/inc/sdetail/669/742
Drivers side should work out with just adding a plate, the Passenger side will need more work to get it in there right with out interfering with the oil filter boss.


4x4 adapter may help?

Robert


With Bouchillon's brackets it helps, with the V6 P-side bracket the "box" part hits the casting on the block. so I have to make the "box" section narrower.....I still might use the 4x4 adaptor ,
I appreciate the input