I do not have the pump yet but this is what I have set up already. First I bought AndyF water manifolds, [ AR Engineering ] they bolt on where the stock water pump was on the front of AndyF front motor plate. I purchased an aluminum radiator and removed the upper return outlet and welded on 2 12an male fitting, the AndyF water manifolds are also 12an . Next is to purchase a Meziere dual outlet remote pump, not cheep. As my radiator has a 1 3/4" bottom outlet an adapter will be needed for the pump. My plan is to connect the pump with braided hose to the bottom of the water manifolds. The top outlets of the manifolds will be plumed to the top fitting of the radiator. This is my plan but it could also be plumbed the opposite for reverse cooling by just changing the hoses around on the manifolds. Meziere also makes a remote pump that mounts on the radiator, that eliminates the hose from the radiator to the pump, my application didn't have room for that type.