Listen to poly - everything else is just opinions without data it seems.
Not sure how you could go wrong with leaving the pushrods out.
Hey guys, not sure of the relevance here. My goal is to have the cam lubed, and button the engine up. But if I leave the springs uncompressed, then I have to spin the cam a few times to set the lash on all the valves essentially wiping some of the lube off the cam.
If I leave the engine open, I can just re lube after setting the valves, but that means leaving it open.
So I guess it's really, would you:
a) leave it open with valves unadjusted
b) button it up with valves unadjusted
c) button it up and adjust valves.
