Originally Posted By dartman366
Originally Posted By rowin4
Installing bushing will not prevent a lifter from coming out of the bore if a push rod happened to break or come off the rocker for some reason. Most blocks are bushed because of alignment or wear problems. So if thats your reason , save your money.
no it won't but will help sustain oil pressure if you do loose one,that little .040 .060 hole in the bushing leak's a lot less oil than the big gaping hole that the factory intersection will, and yes my my block is bushed.


Exactly why im having it done. Save the bottom end just in case. Also correct any misalignment from the factory. Thanks to Duane Porter for advising me on this. He's the best!!

1.50 60Ft. , 10.75@ 127MPH Hauling 3900 LBS.