The problem bearing was the one I had to muck with a few times to line up the oil holes. Figures that one wouldn't be done with me so soon. I ended up using my old camshaft as a bearing knife of sorts... Cut a straight groove with a hacksaw and gave it a few turns. Works great, but you have a lot of bearing material to clean out of the tiny groove pretty regularly:
Cam_Bearing_Tool by clair_davis, on Flickr

I ended up cutting three grooves in that journal, and the cutting went pretty well. Probably had the cam in and out of the block a dozen times, but everything turns nice and smooth now, and the bearing actually looks pretty nice.

Now to get the assembly back on track... until the next thing comes up...

Thanks again for all the help, guys!

Clair