Can see the snap ring in the lifter through the pushrod hole
Looks fine buts that's all I can see is just the top of lifter

Brought a spring compressor home last night from a Mopar guy at the airport
Bolted it in place on the head and rotated it down and the valve moved freely up and down and sounded nice snapping back in place against the valve seat

Compared to other valves on the same head everything felt and went very smooth

Did a compression check on that cylinder while a friend was opening and closing that valve with the spring tool and the gauge read 180 #s

So I would assume things are fine

Snap On Videoscope is broke at work , new camera end ordered , just my luck yesterday

Anyways now have to order new pushrods , you said same factory length of 8.575 "

Wish I could see that cam lobe

Thanx Scott