Quote:
Quote:
Quote:
Depends what you are doing with the car, drag car
and you might want more weight transfer... raise it
up some.... you measure from the centerline of the crank
MR P BODY - Iam going to do the same. But how much is enough to raise the motor from stock location? Iam talkeing about my `74 Charger ?
That would depend on what you use for a hood, if you
could raise it up 4" it would help alot(trying to
get the engine closer to the CG of the car) but it
also depends on the HP level you will make, the higher
the HP the lower it needs to be
Motor is coming XR-2 / P7 combo so at least 750hp.
Hood is no proble because it`s allready have scoop and that`s easiest part to make new higher scoop if needed. So 3-4" lift should be ok? So I need to raise tranny mount also same level, right?
Last edited by Georg; 02/13/09 09:29 AM.
